If you live in the Greater Toronto Area and want to make your home energy efficient, you should make sure it is well insulated. The roofing, walls, and ceilings of a home need some form of insulation to avoid heat loss in the cold months and to prevent heat from coming into the home during the summer. Insulation is like a barrier between the floors, walls, and ceiling of a home. It will reduce the amount of cooling and heating needed and also will minimize noise pollution. Blown in insulation is the best choice for older homes with insufficient insulation on their unfinished attics and cavity walls.
Types of Blown In Insulation
Blown in insulation or loose fill is a form of insulation that can be blown into cavities and other hard-to-reach areas. There are two types of blown in insulation: cellulose and fiberglass.
Blown in cellulose insulation is made from recycled environmentally safe material. It is great for attics and it is also an excellent choice for insulation into walls because it allows little air infiltration. Due to its sensitivity to moisture cellulose insulation is not recommended for basements. Generally, it is cheap and it can save up to 25% more money compared to other types of insulations. Blown in cellulose insulation is also treated with boric acid that works to repel danger and pests.
Blown in fiberglass insulation is made up of recycled glass and sand. It is more resistant to moisture and also is used as a vapour retarder to reduce risks of mold, improving the quality of air. Fiberglass provides the comfort of knowing that it will last a long time without settling or deteriorating with age. Both the cellulose and the fiberglass are blown in, using a large hose and allowing uniform coverage. Also, they can be installed directly over existing attic insulation and have comparable R-Values. The R-Value of blown in cellulose insulation is better than most other insulations. Cellulose and fiberglass insulation reduces the risk of fire by creating an airtight seal that keeps the air from flowing through small spaces into a fire.
Blown in insulation in GTA has several benefits:
Blown in insulation is very easy and quick to install when done by insulation experts. This type of insulation seals the tiny cracks and crevices of your home and its material is very flexible and prevents the inside temperature from leaking out. Whether you are building your home or upgrading your existing home, insulating it at that time with blown in in the GTA is the best investment you can do to have better control on the utility bills.
Insulating Your Attic Can Save You Money
The leading cause of the high energy bills that you receive is usually little to no insulation in your home. Insulating the attic is one of the most practical home improvements in the GTA that you can make. Without a sufficient amount of attic insulation in place to trap the air in your home, the money that you have invested in utility bills is going up and out of the roof. Attic insulation and ventilation play an important role in regulating the total comfort and the temperature in your home all year long.
When Should You Replace Your Insulation?
Insulation can perform effectively for years and is manufactured to last a very long time. It is one of the most crucial parts of a good home energy program, but just like any part of your home, insulation is also prone to damages and may end up degrading over time. Older homes in the GTA will need their insulation replaced because the quality of insulation has improved since the 1970s.
These are the signs that you should check to know if your insulation might need attention:
- Higher energy use than usual
- Fluctuating indoor temperature
- Pest infestation (rats, mice, or possums)
Contact Eco Spray Insulation for Your Next Blown In Insulation Installation in the GTA
If you are looking for high-quality insulation in the Greater Toronto Area, look no further than our team at Eco Spray Insulation. We have years of experience providing the GTA with residential services such as attic insulation and we take pride in our work. Our team will be happy to demystify and explain any part of the insulation process from R-Value to the type of insulation. We are here to help you choose the right insulation for your needs and we want to make sure you get the most out of your investment in home insulation.
Here at Eco Spray Insulation, we will inspect your attic space to determine the effectiveness of your current insulation. Over time the insulation that is in the attic underperforms and your home will not feel as comfortable in the cold and summer months. Our team will not only remove your old insulation in the attic, but also they will repair any damage and make sure your attic is ready for the best insulation possible.
Our blown in insulation is effective in all terms to kill the pests and also you will not hear the noise or chaos from outside. This type of insulation is a very popular choice for both homeowners and commercial buildings in the GTA. To request a free estimate or to learn more about our blown in insulation services you can contact us at 1-416-860-6664, or by email at [email protected], and our Professional Team will be happy to assist you.