How to Prevent Mold with Spray Foam Insulation

How to Prevent Mold with Spray Foam Insulation

How to Prevent Mold with Spray Foam Insulation

Signs of Mold in Your Home

Mold in the house is risky, as you have read. Fortunately, it’s generally simple to spot mold in your house. 

  • Mold odor. Not all molds produce a smell, however many do. On the off chance that you smell a musty odor, at that point there may be mold in your home.
  • Visible signs of mold growth. A few molds may seem white and string like. Others show up in bunches of little back spots. Mold may be dark earthy colored, dark, dim green, or white. Mold that develops behind vinyl and backdrop may be orange, pink, or purple.
  • Signs of water damage. Any long-term moisture will inevitably lead to mold. If your home has water stains, discoloration on walls, floor, or ceilings, or if you notice bubbling, cracking, or peeling paint or wallpaper, then you’re likely dealing with mold-producing problems.
  • Water leaks. Mold development from leak isn’t generally recognizable, particularly if the break is behind a divider or other shrouded surface. If you are aware of a release, at that point it’s essential to get it fixed rapidly. Territories where buildup regularly structure can likewise be a sanctuary for mold, for example, windows and metal lines.
  • Past flooding. On the off chance that your home has encountered any flooding before, at that point all things considered, you have some type of mold development accordingly. 

Spray foam insulation (referred to as polyurethane spray foam insulation) is the only product of its kind that can completely seal a space. Once applied, every hole, gap, and crack is completely sealed. And in the attic, nothing can compare with the envelope of insulation that is installed with spray foam. Sealing the attic is probably the most critical, in terms of counteracting moisture. As a product, spray foam insulation does not attract mold. And unlike wood or metal, spray foam does not rot, rust, or deteriorate. This means that an area properly sprayed with foam insulation will never become a food source or a hospitable environment for a mold colony. Mold in the home can be seriously harming your home and your wellbeing. On the off chance that you figure your home may have a mold issue, look for an expert form investigation immediately. Eco Spray Insulation offers safe, affordable, fast, and effective mold inspection and treatment.

Mold Warning Signs: Allergies and Other Health Issues

When someone has mold in their home, they usually show allergy-related symptoms. If you’re not sure whether your allergy-like symptoms are caused by mold in your home, then consider this question: do your symptoms get better once you go outdoors or leave your home? If so, then there is a good chance that mold is the culprit.

Symptoms of mold allergies include:

  • Coughing
  • Sneezing
  • Sore, itchy throat
  • Congestion and runny nose
  • Sinus headaches
  • Wheezing and difficulty breathing
  • Itchy, watery eyes
  • Irritated, itchy skin

What’s Causing Mold in My Home?

Mold needs these conditions before it can begin to grow in a home:

  • Mold spores
  • Darkness (mold can’t grow under ultraviolet light)
  • Warmth (mold can’t grow in freezing temperatures)
  • Oxygen
  • A food source (eg wood, drywall, cotton)
  • Enough time (most molds can begin to grow in 24-48 hours if the conditions are right)
  • Moisture (eg water leaks, humidity)

Moisture is really the key cause of mold growth since the other conditions on the list are always going to be present in homes.

So, essentially, the difference between whether mold grows in your home or not comes down to whether you have a moisture problem.

  • Humidity Causes Moisture

If you live where humidity in the air is naturally high, like by the coast or another large body of water, then mold growth in your home can also be a recurring problem.

Also when moisture inside your house evaporates into the air it increases the humidity indoors. You probably should know that if your home isn’t well ventilated then the humidity will stay high for a long time.

Drying clothes indoors on clothes lines or stands is a common culprit when it comes to causes of indoor humidity problems. The household HVAC system can also create humidity troubles while it artificially heats or cools the air.

  • Leaking Pipes Cause Moisture

Water leaks from pipes are a typical reason for mold development. The most noticeably terrible breaks are the ones that go undetected on the grounds that they are hung out of view, as inside a divider. When you find these holes, moisture has typically begun to develop as of now.

  • Leaks in Roof Cause Moisture

Like some leaking pipes, a roof that leaks into the attic might not be discovered until it’s already led to mold growth.

The best thing to do is to check once in a while the attic regularly for leaks and keep an eye on the ceiling below the attic. If you notice any signs of water damage on the ceiling or any mold that has grown through then you probably have a leaking roof.

  • Condensation Causes Moisture

Cold surfaces can create condensation in your home. Condensation collects on cold metal pipes as well as on cold concrete floors, even if there is carpet over the top, and on walls. Places like these where condensation occurs are prime spots for mold growth.

  • Poor Ventilation Causes Moisture

If your home is poorly ventilated it can create pockets of stagnant moist air which mold thrives in. Steam and water evaporating into the air creates humidity inside which then needs to be circulated outdoors through windows to keep the moisture level balanced.

  • Damp Basement Causes Moisture

Basements often contain higher amounts of moisture or humidity than other rooms because they are usually not well ventilated. Basements are also often colder meaning more condensation occurs which leads to dampness and humidity.

Spray Foam Insulation to Prevent Mold

It isn’t enough just to have insulation. Moisture is always a big problem. You have to have the right kind for your home. While there are many different types of insulation, the best fit is closed cell spray foam insulation to defeat the moisture. Unlike other insulation materials, spray foam is water resistant, meaning it keeps that dangerous moisture where it belongs: outside. As an added bonus, spray foam forms an airtight seal. Outside air and allergens will stay out of your home, and the fresh air that you pay to heat or cool will stay inside, which can drastically cut your utility bills! Proper ventilation, especially in an attic, will assure appropriate air circulation to avert moisture accumulation. And depending on the home, this may include roof vents; soffit vents; even exhaust fans. The whole idea is to combine airtightness and air circulation in a well-balanced system. Clearly, spray foam insulation does much more than just insulate.

Can Spray Foam Insulation Decrease the Danger of Mold?

When there is so much moisture or when water accumulates indoors, mold growth will often take place especially when moisture problems remain undiscovered or not addressed. In order to prevent moisture inside your home, spray foam insulation should be installed. While there are a number of insulation materials available today, spray foam insulation is one of the best insulation types since it’s sturdy, crawls into spaces, and can last for a lifetime.

When warm air comes in contact with cool surfaces, it condenses and stays there. This could result in mold growth, mildew build up and structural weakness for your home or building. Spray foam insulation minimizes moisture-related problems caused by random air leakage because it fills all the cracks and crevices where air enters.


As you can see, Eco Spray Insulation offers only high-quality work to satisfy your needs.Eco Spray Insulation has the best professional spray foam experts team.

Our unsurpassed attention to detail means that once you hire us, you won’t have to worry about anything. Our spray foam experts handle the entire commercial spray foam or residential spray foam install from start to finish. In addition to avoiding damage to your home, costly guesswork, and shortcuts that often result in failure, hiring us will save you a great deal of time and stress. What are you waiting for? Give us a call today at (416) 860-6664 or email us at [email protected]  if your home or business needs insulation and we’ll happily choose the right kind of insulation and properly install it for you!

Homeowners know Eco Spray Insulation is the right choice!

Request a Free Quote for Spray Foam Insulation

    Spray Foam InsulationBuilding ScienceHome Insulation

    moisturemoldspray foam insulationspray foam insulation toronto

    Comments are disabled.