If you haven’t insulated your home or business you can benefit a lot from spray foam insulation in terms of cooling and heating, noise reduction, and many more that we will know more about in this article.

Where It’s Best To Apply Spray Foam Insulation

Properly installed, spray foam insulation helps ensure the airtightness of your home, and even serves as a vapour barrier in the case of closed-cell foams with less cost than the majority of other insulation methods. Here are some spaces that you will need to isolate:

1. Attics, crawl spaces, or basements: Spray foam is the ideal solution for small spaces that do not allow the installation of panels or large rolls of insulation.
2. Floors. Spray foam insulation makes it possible to effectively coat the ducts and pipes, for example when installing underfloor heating and above all to reduce your energy costs.
3. Walls. Requiring no joints or fittings, spray foam can be deposited on the surface in a uniform layer of about 10 cm and will provide thermal insulation and airflow of your walls.
4. Roofs. Spray foam eliminates thermal bridges and also has the advantage of being perfectly waterproof. It does not settle or peel off over time and envelops all areas of the roof, even the most difficult to access.

Where in your home you want to insulate and what function you seek will determine whether you choose open or closed-cell foam. For example, an open-cell foam will be more suitable for walls to allow the evacuation of water vapour. A professional insulation contractor will be able to direct you to the type of foam recommended according to your needs.

How Much Spray Foam Insulation Do You Need?

The amount of spray foam insulation that an area requires varies from home to home. Homes that are located in extreme weather fluctuations require thicker insulation with a higher R-Value.

Spray Foam Costs vs. Fiberglass, Batt & Cellulose

Spray Foam Insulation Cost:

• $2,360 on average
• R-Value of 6-7 per inch closed cell and 3.5-3.6 per inch open cell
• Highest R-Value insulator
• In addition to insulation provides air sealing

Blown in Insulation Cost:

• $1,440 on average
• R-Value of 3.1-3.4 per inch fiberglass and 3.2-3.7 per inch cellulose
• Some materials offer recycled content

Fiberglass Batts Cost:

• $300 to $600 on average
• R-Value of 2.9-3.8 per inch 
• Quick and easy to install
• Up to 30% can improve energy efficiency

Rock Wool Cost:

• On average to install it can cost $1,000
• R-Value of 3.0-3.3 per inch
• Has fire resistance and sound deadening
• Quick and easy to install

Closed Cell Vs Open Cell Spray Foam Insulation Cost

Cost of Closed Cell Spray Foam Insulation

Adversely, the closed cell spray foam’s density is 2lb per cubic foot. Its R-Value is R6.5 per inch. It is used on walls, ceilings, roofs, and under tabs. This type of insulation costs more than the open cell, but the high price is justified by its quality. Spray foam insulation cost varies between $1.55 to $8 per square foot, depending on which part of your home needs to be insulated. When applied as should, this spray foam gives better results than any other method of insulation that is available in the market today. Having a look at the air exchange, this method gives an excellent insulation barrier. It is also really effective for repelling moisture from the inner walls of your house. Closed cell spray foam increases the ceiling’s strength, roof, or wall structure with glue like tenacity.

Spray Foam Insulation Cost Per Square Foot

The cost of spray foam insulation is also calculated per board, such that, open cell spray foam costs vary from $0.44 to $3.00 per square foot, and the closed cell spray foam cost varies from $1.25 to $1.65. The average spray foam insulation cost per professional installation is $2,021 for the majority of insulation companies in Toronto. This amount depends on whether the structure that is being insulated is newly constructed or renovated. To conclude, finished homes are not very suitable for insulation. However, they make excellent candidates for weatherization or an energy audit.

Cost of Materials by Size In Square Feet

Cost of Open Cell Spray Foam Insulation

Open Cell spray foam’s density is half an lb per cubic foot and an R-value of R3.5 to R3.6 per inch. The R-value, also known as the thermal resistance, is determined by the foam density of the spray such that the higher the foam’s density, the higher the R-value. R-value’s role in the insulation process is to show the resistance of the material to the heat flow. It is really important for this value to be high because this results in a greater resistance too. Open Cell foam spray has a lower density compared to that of its counterpart, the closed cell spray foam and it is not resistant to vapor. When used in attics and cool temperatures, it is advisable for the spray to be applied together with vapor retarder paint. The cost of the R6 foam varies between $2 to $7 per square foot.

DIY Spray foam insulation cost

You can choose to install foam insulation by yourself using kits from brands of your choice. The average price of covering about 200 square foot with a foam insulation kit varies between $300 to $600, which is about two or three kits used. When you buy these kits, you will find a foam made up of two types of liquids referred to as Icynene, which are firstly heated and then pushed through a gun on the can. The installation cost might seem minimal when you decide to do it by yourself but if you are not experienced in installing spray foam, you may find it difficult to evenly spread the foam over a surface.

Failing to cover some spots or leaving some holes may lead to cold air getting into the structure. You can safely proceed with the insulation project if you intend to deal with small projects only such as foam insulation in a narrow space. Other large projects such as the attic, basement, or garage should be left to a certified insulation company that can provide the proper equipment and has a respectful background. They will properly price the entire insulation project, whereas you on the other hand could incorrectly calculate the cost of the insulation project and end up losing more money in the process.

Measuring the thermal resistance (R-Value)

During the process of spray foam insulation or any other type of insulation, the R Value should necessarily be the basic part of your decision. However, it is also important to note that the loss or gain of heat can occur in many different ways, and as a result, measuring insulation through the R-Value alone is not always the right way.

Polyurethane foam spray does not necessarily guarantee prevention of all methods of heat transfer from taking place. Alternatively, you may want to consider radiation, heat conduction, air infiltration, convection, and intrusion alongside the amount of moisture accumulation. All six of these mechanisms are the key factors of the effectiveness of the insulation.

Spray foam insulation cost difference for existing and new homes

There is a huge price difference when it comes to insulating a new home and insulating a relatively older home in Toronto. Insulating a recently constructed house is usually much easier because the insulating company can work effectively and make sure that the insulation is designed for optimum protection against heat transfer and sound, whereas installing spray foam insulation on an older home, specifically those that contain existing insulation may cost more and require more time to install, which also increases the cost. Energy audits and weatherization are the most recommended alternatives for these kinds of homes.

Contact Eco Spray Insulation today for a free no obligation cost estimate on your next spray foam insulation project. Or simply get a quote over the phone at  (416) 860-6664.

FAQs about Spray Foam Insulation Cost in Toronto

Q: How much does it cost to insulate a 1,500 square foot house with spray foam in Toronto?

To cover 1,500 square feet with one inch of closed-cell spray foam insulation cost approximately $1,500 to $2,250. To this total are added the labor costs and thickness. The above value may also change depending on the number of walls in a house.

Q: How much to spray a 30×50 metal building with closed cell foam?

To cover the walls of a 30×50 metal building with one inch of closed-cell foam may cost approximately $1,600 to $2,400. And if you hire a professional for this work you should expect to pay more in labor costs.

Q: How expensive is spray foam insulation? 

Expanding foam insulation runs from $0.44 to $1.50 per board foot, open-cell is less expensive, and closed-cell spray foam insulation costs more. In comparison to fiberglass, spray foam insulation is more expensive.

Q: Is spray foam insulation worth the cost? 

For too many homeowners, spray foam insulation is worth the cost because it protects against moisture, air seal is energy efficient, and also can add structural integrity to your house.

Q: What is the R-Value of 2 inches of spray foam? 

Depending on the type of insulation material the R-Value of 2 inches of spray foam runs from 7 to 13. Closed-cell has a higher R-Value than open-cell foam.

Q: Where do we apply spray foam insulation?

Spray foam insulation is applicable on roofs, walls, and on surfaces with contours and in corners with the aim of creating a tight air ceiling barrier. The two most used types of spray foams are made of polyurethane and are referred to as open cell and closed cell spray foam.

Q: Can I save money by choosing to insulate my property with spray foam?

When it comes to prices and costs, every investment in your house or property will certainly cost you a specific amount of money. Regardless, not each of these investments presents you with a chance to save money. Saving yourself money that is spent on bills is actually possible with the use of spray foam insulation. These are some of the costs that should really be considered as future investments, especially for Toronto residents. Spray foam insulation costs depend on what type of spray foam is used and the amount that is applied. You can choose between insulating your whole house or just a part of it.

Spray foam insulation is considered the best alternative to fiberglass insulation during construction or construction plans. The type of foam used in this insulation method is flexible and expandable and is easy to spray on existing wall cavities during construction or on roofs.

Q: Does spray foam shrink over time?

Similar to foam board insulation, spray foam will shrink and expand over time responding to different temperatures. However, this is a normal thing to happen and it does not mean that your insulation will break down.

Request a Free Quote for Spray Foam Insulation

Eco Spray Insulation has prepared this article in order to show you the powerful impact on your finances and overall home environment that blown in insulation Toronto can offer to every Canadian homeowner. Learn how this cutting-edge insulation technique can provide a host of advantages, such as impressive energy savings, lower utility costs, improved thermal efficiency, and more comfortable living areas.

Which are the Power-Packed Benefits of Blown-In Insulation?

Homeowners may find blown-in insulation to be a compelling option due to a number of benefit-packed advantages. 

• Improved Energy Efficiency →  Blown-in insulation Toronto forms a highly effective thermal barrier that lessens heat movement between the interior of your home and the outside world. As a result, energy efficiency is increased and reliance on heating and cooling systems is decreased.
• Significant Cost Savings →  Blowing in insulation helps you save money by reducing heat gain or loss. As a result, you may anticipate year-round significant utility bill savings that will result in long-term cost savings.
• Better Comfort →  Blown-in insulation efficiently fills up holes, cracks, and voids in the walls, attic, and other parts of your house. Removing drafts and cold areas promotes a constant and cozy indoor temperature for a comfortable living space.
• Soundproofing → Blower-in insulation’s dense composition serves as a reliable sound barrier, minimizing noise transmission between spaces and from the outside. It contributes to a quieter living environment.
• Greener Alternative → An environmentally responsible choice, blown-in insulation Toronto is frequently created from recyclable materials like cellulose or fiberglass. Furthermore, its energy-saving attributes aid in lowering overall carbon emissions.
• Adaptability and Versatility → There are many places where blown-in insulation can be installed, including attics, walls, and floors. It adapts to unusual shapes and completely fills voids to ensure complete covering and top performance.
• Rapid and Accurate Installation → Blown-in insulation is normally installed quickly and effectively by professionals. Utilizing specialized machinery, the insulating material is blown into position, causing the least amount of disruption to your normal activities.
• Long-Term Durability → Blown-in insulation Toronto is made to be long-lasting and keep its insulating qualities without settling or weakening over time. Through the lifecycle of your home, this assures stable energy efficiency and ongoing cost savings.

You may enjoy these advantages and make your home a more cost-effective, cozy, and energy-efficient living environment by utilizing the power of blown-in insulation.

How does Blown-In Insulation function and what impact does it have on Energy Efficiency over time?

A type of insulating material that is applied by blowing or pouring it into place is called blown-in insulation  Toronto, sometimes referred to as loose-fill insulation. Typically, it is made up of tiny particles or fibers like mineral wool, fiberglass, or cellulose.

For a more thorough and steady thermal barrier, blown-in insulation provides good coverage and is especially useful in filling cavities, gaps, and difficult-to-reach places.

The functioning of blown-in insulation and its dynamic influence on energy efficiency are explained in more depth below:

• Material Preparation → To prepare blown-in insulation materials, they must first be reduced to tiny fibers or particles. This can be accomplished by chopping or shredding larger parts into smaller bits to ensure a shape that is light and portable.
• Installation Method → Specialized tools, like blowing machines, are used to apply blown-in insulation. The machine is filled with the insulating material before blowing or spraying it onto the desired location. The machinery enables exact control of the insulation’s density and distribution.
• Filling Holes and Gaps → Blown-in insulation Toronto works especially well to plug holes, gaps, and cavities in the building envelope. When compared to other insulation techniques, it can fit into tight spaces and irregularly shaped or packed surfaces. It penetrates air from escaping and heat transfer, this guarantees a tight and reliable thermal barrier.
• Thermal Efficiency → Insulation that is blown in is a very effective thermal barrier. Its insulating qualities aid in preventing the movement of heat between a building’s interior and exterior. The indoor environment is kept at a more constant and cozy temperature by minimizing heat flow.

• Air Penetration → Insulation that is blown in also helps with air sealing. In order to stop air penetration and exfiltration, the minor particles or fibers can fill in tiny crevices and gaps. This enhances total energy efficiency by reducing energy loss, and eliminating drafts, and other issues.
• Impact of Dynamics on Energy Efficiency → Energy efficiency is dynamically affected in two different ways by blown-in insulation. In the first place, it successfully lowers heat loss throughout the colder months, preserving the pleasant temperature inside the structure and lowering the demand for continuous heating. A second benefit is that it reduces heat gain during the summer’s sweltering days, keeping interior spaces from being overheated and lowering the need for air conditioning.

Blowing in insulation Toronto reduces energy waste, lowers heating and cooling requirements, and enhances overall energy efficiency by supplying an airtight and well-insulated thermal barrier. This dynamic effect not only improves comfort but also results in significant long-term energy savings and lower electricity costs.

Which Potential Financial Benefits may homeowners expect if they choose Blown-In Insulation?

Homeowners who choose blown-in insulation can anticipate significant expense savings and financial advantages. A highly efficient thermal barrier is created by blown-in insulation, which results in less energy being used for cooling and heating purposes. According to studies, homeowners can reduce their energy costs by 10% to 50%.

Blown-in insulation Toronto delivers long-term cost savings that may exceed thousands of dollars throughout its lifespan with an ROI of 2 to 7 years, which is relatively swift. Further improving the overall cost benefits of selecting blown-in insulation are potential financial incentives and tax credits for installing energy-efficient insulation.

Why a Reputable Insulation Contractor is essential for conducting Blown-In Insulation Services? 

It’s critical to follow these guidelines when having blown-in insulation professionally installed in order to ensure a smooth and effective process. First, find an appropriate blown-in insulation contractor by doing extensive research and getting referrals from reliable sources. Check the licenses and certifications of insulation contractors Toronto to confirm their proficiency, and look for those who have received good reviews. Additionally, be sure the insulation contractor Toronto is adequately covered by liability and workers’ compensation insurance. 

A qualified energy inspector may inspect the current insulation in your home and pinpoint any areas that need to be improved in order to determine your insulation needs. Depending on the environment, local building requirements, and your objectives for energy efficiency, they will advise on the proper R-value for the blown-in insulation. In order to prioritize the installation, identify any issues with your home’s insulation or drafts.

Consult with Eco Spray Insulation contractors Toronto or insulation experts who can offer precise advice when estimating the quantities of materials. They will take into account elements such as the area that needs adequate insulation, the target R-value, and the particular insulation material being utilized. In order to achieve your thermal efficiency goals without over or under-insulating, this will help guarantee you have the appropriate amount of blown-in insulation.

Take action now to improve the comfort and energy efficiency of your house. To determine your insulation needs and pinpoint areas for improvement, schedule an insulation appointment with the Eco Spray Insulation project manager, who is always willing to help you with every insulation information you may need.

Don’t pass up the chance to reduce your energy costs and improve your living environment. Act right away to benefit from the dynamic effects of blown-in insulation!

By insulating basement walls you will contribute to both moisture and mold growth prevention as well as keep pests out of your home. This article, provided by Eco Spray Insulation, offers a wealth of information on the insulation of basement walls, including its benefits and various insulation options that you may wish to consider before embarking on your basement insulation project.

Why Insulating Basement is worthy of your property? 

Basement insulation, as a wise home investment, is worth considering for a number of reasons including increased home comfort, energy savings, indoor quality, home value and reduced noise levels. By making your home more energy-efficient and comfortable, basement insulation can enhance your quality of life and save you money on energy costs.

You may make your basement a comfortable location by hiring a local insulation contractor to insulate the space underneath your home. The main benefit of insulating basement walls is to stop heat from transferring between the outside surfaces of your house, such as the foundation. After being air sealed and insulated, your basement will be protected from Canada’s harsh winters and exhausting, hot summers. Your home will have more consistent temperatures throughout if the basement is better temperature-controlled.

Why Spring is the Perfect Season for Insulating Basement Walls?

Several factors make spring the ideal time to insulate basement walls:

• Temperature Stability →  Since temperatures during the spring are frequently mild and steady, installing basement insulation is made easier because there is less risk of extremely hot or cold weather.
• Increased Energy Efficiency → Insulating basement in the spring will help you get your house ready for the hot summer months by reducing the need for air conditioning, which will result in cheaper energy bills.
• Reduced Moisture Levels →  Since springtime humidity levels are often lower than those of summer or fall, now is the perfect time to install basement insulation to stop moisture from entering and lower the chance of mold growth.
• Shorter Installation Periods → Since foam contractors are often less busy in the spring, scheduling the installation of your house insulation may be simpler and quicker.

• Comfortable Indoor Atmosphere All Year Long → By insulating basement walls in the spring, you can improve your home’s year-round comfort by helping to maintain constant temperatures and reducing drafts.

By taking advantage of spring’s advantages, you may get your house ready for the warmer weather and enjoy a more cozy and energy-efficient living environment.

Which is the Best Home Insulation Option for Insulating Basement Walls?

For insulating basement walls, spray foam insulation is a high-performance insulation solution that provides a great number of advantages. 

Both open cell and closed cell spray foam are available options that can be applied to basement walls. Open cell spray foam for regions above ground and closed cells for portions below ground is a common recommendation from Eco Spray Insulation foam contractors. 

Closed cell spray foam is a perfect vapor barrier that keeps moisture from passing through it, but it can also conceal leaks that could cause mold. Furthermore, open cell spray foam won’t hold water, and leaks will be obvious.

• Premium Insulation Performance →  Spray foam insulation has a greater R-value per inch than other types of insulation, which makes it more efficient at preventing energy transfer through your walls. R-value is a measure of insulation’s capacity to resist heat flow.
• Air Sealing Capabilities →  Spray foam insulation swells to fill in voids and crevices in your walls, forming a smooth air barrier that aids in stopping air leaks and moisture intrusion.
• Moisture Resistance → Spray foam is a moisture-resistant insulation material and can help stop the formation of mold and mildew in your basement, improving indoor air quality.
• Durability → Spray foam insulation, when incorrectly installed, can endure for many years before needing to be updated, offering a powerful and durable home insulation alternative.
• Versatility →  Spray foam is a versatile and efficient option for insulating the whole basement because it can be utilized in a range of applications, such as walls, ceilings, and floors.

Why Basement Insulation Maintenance and Upkeep is important during Springtime?

As mentioned before, basement insulation is extremely beneficial for any property type. Home insulation should be correctly installed in your home’s basement by the right professionals who have significant knowledge and experience in insulating basement walls, ceilings, foundations, etc. 

• Ensure Insulation Performance → Basement insulation can become damaged or compacted over time, which reduces its ability to stop heat transfer through your walls. Regular insulation inspections and upkeep can assist find any problems and fix them before they affect the function of your home insulation.
• Keeping Moisture Out →  Insulation that gets wet or damp loses its insulation capabilities and turns into a haven for mold and mildew. Your basement walls can stay dry and avoid moisture infiltration with routine cleaning and upkeep.
• Maintaining Indoor Air Quality → Deteriorating or broken basement insulation may release hazardous particles into the air, lowering the quality of your indoor air. Your home insulation can remain intact and contamination-free with regular maintenance.
• Preventing Structural Damage →  Your basement walls and foundation can sustain structural damage from moisture infiltration and mold growth, which will require expensive repairs in the future. These problems can be avoided with routine maintenance, which will also protect your home’s structural integrity.

Consider insulating basement walls this spring if you want to increase the comfort of your home and increase its energy efficiency and indoor air quality. To get started, get in touch with the Eco Spray Insulation project manager and take a free project estimation on your upcoming home improvement project on insulating basement walls. 

Eco Spray Insulation contractors can help you choose the right type of insulation for your home, ensuring that it is installed correctly and providing advice on how to maintain it. This not only helps you save money on energy bills but also ensures that your home is properly insulated against outdoor elements. With proper home insulation, you can blow away energy waste and enjoy greater comfort in your home while saving money at the same time.

What does Blown In Insulation mean and what offer to homeowners?

Blown-in insulation is a type of insulation that is installed by an insulation contractor in the walls, attic, and other areas of the home. Blown in is a well-known insulation product that is widely used in both residential and commercial properties in Canada. This insulation product can be found in two certain compositions, such as fiberglass and cellulose, and they give exceptional home insulation results in roof cavities and attics. Both products have an increased R-Value but at the moment of insulation installation, cellulose blown in, has slightly a higher R-value. 

Cellulose blown in has a tendency to settle and this means that the R-value effect will be by far long-term. This type of insulation provides an effective barrier against heat loss and helps to keep your home comfortable all year round. With blown-in insulation, you can save money on energy bills while also improving the air quality in your home. Eco Spray Insulation contractors can help you choose the best blown in insulation for your home and ensure that it is installed correctly.

What are the Benefits that we Gain from Blown In Insulation?

Blown in insulation is a great way to keep your home comfortable throughout the year. It helps to reduce energy costs and provide better indoor air quality. In addition, blown in insulation provides many other benefits for homeowners, such as soundproofing, fire resistance, and improved comfort. Eco Spray Insulation contractors are trained to install blown in insulation correctly and safely so that you can enjoy these benefits for years to come. With the right insulation contractor and the right kind of home insulation, your home will be more comfortable and energy efficient than ever before.

More specifically, there are some key benefits that blown in insulation offers to every property when properly installed. You can determine whether blown insulation is appropriate for your home by using the information provided below to better understand the characteristics of the material.

Great Value for Money 

You want to ensure that your investment will be profitable in any home renovation project. Thankfully, blown in insulation can be fairly cost-effective since, after installation, you could expect significant reductions in your energy bills. For some households, the project’s initial prices might seem a bit high, but you will eventually save a significant amount of money as a result.

Since the blown in insulation will make your home energy-efficient, you won’t have to stress about HVAC or heating system leaks.

Simple Installation

One of the most compelling advantages of blown-in insulation is its simplicity of installation. In order to make an insulating blanket, the process is carried out by utilizing a machine to blast the material into the empty spaces that need to be filled.

Increased Energy Efficiency 

The fact that this is one of the top advantages of blown-in insulation is only natural given that energy efficiency is one of the main motives that homeowners select insulation solutions. This method of insulation includes blowing the material into the place you want to insulate, which can more effectively fill in the gaps and cracks to stop air leaks and increase energy efficiency.

Fire Protection 

Blown in insulation provides an extra benefit by creating an airtight seal. This sealing characteristic increases the fire resistance of your home by preventing air from spreading into a fire and triggering massive flames that can cause severe property damage. Your home will benefit from insulation when you select conducting a cellulose insulation installation. 

Noise Reduction 

The ability to dampen and control sound is a further advantage of blown-in insulation. The airtight seal on the insulating blanket made of the blown material reduces noise from outside and within the house. For individuals who prefer using their attic for business or enjoyment, this benefit will be particularly desirable because it allows them to relax in their own environment.

Reduce Condensation

To guarantee that your home attic is thoroughly coated with insulation, blown insulation provides a superb job of filling in cracks and small crevices. In turn, this prevents dampness and mildew from forming by lowering moisture levels and condensation in the area.

You should try to minimize moisture as much as possible because it may cause damage to your insulation and roof, which can be a big problem for most households.

Why is Professional Blown In insulation essential for your property?

Now that you have a good amount of information on what kind of benefits blown in insulation offers to a property, there is upon your hand to contribute to your monthly savings. Whether you need attic insulation, basement insulation, spray foam insulation, blown in insulation or additional home insulation types, Eco Spray Insulation is just one call away. 

You may rest confident that you are in excellent hands because our staff has the necessary training to carry out the mentioned services effectively. To arrange a free on-site consultation if you are interested in having your home insulated, don’t hesitate to get in touch with the Eco Spay Insulation project manager. 

Health Advantages of Improving Your Insulation

• Homes that are healthier – By minimizing the amount of dust and other pollutants that wind up in your house, insulation helps keep it healthy.
• Reduced Mold Risk — Mold thrives in warm, moist, and dark environments. Upgrading to a greater level of insulation prevents moisture from accumulating inside your walls and attic, as well as reduces the amount of light that can reach the same places, all of which minimize the likelihood of mold formation.
• Blocks Outdoor Air Pollutants – Spray foam insulation keeps drafts, dust, and pollen out of your home, hence enhancing interior air quality.
• Inadequate Insulation – Improperly placed insulation can lead to mold, mildew, and moisture buildup. Allergies and asthma sufferers may be worse by this. Shortness of breath, chest discomfort, coughing, nausea, and vomiting are all possible side effects.

Benefits of Having a Good Home Insulation

Anyone who has an insulated home can attest to its value. Homes can use less energy, minimize air pollution, and save money on heating and cooling expenses. Spray foam Insulation in the attic reduces heat transmission by trapping air within your home’s walls. When warm air comes into contact with the exterior of a wall, it cools due to convection. Because of the insulation, it remains within your home rather than escaping into the outside air. According to Eco Spray, one of the most significant environmental concerns we face today is energy efficiency.

Advantages of Spray Foam Insulation and Home Insulation

The EPA cites numerous advantages of spray foam insulation:

• Insulation also aids in temperature regulation in your home. It inhibits the escape of heat from within the home to the exterior in hot weather. In cold weather, it prevents warm air from escaping, lowering fuel use or allowing you to lower your thermostat a few degrees.
• Spray foam insulation can save your utility expenditures by up to 30%.
• Spray foam insulation has an R-value ranging from 7 to 25 per inch and provides good thermal resistance. It might assist you in saving money on heating and cooling.

Insulation plays a significant part in your home’s energy efficiency, and appropriate insulation is critical for good health. A well-insulated attic will assist to lessen the load on your central heating system while also saving energy. All of these advantages are made possible by efficient home insulation with spray foam insulation installation.

If you have been putting off upgrading your house insulation, now may be the time to do it, with rising energy rates and electric expenses. It definitely pays to go ahead and make those renovations now for additional comfort, not just financially, but also physically, as summer comes next year, which means more usage of air conditioners, which results in higher electricity costs.

So, don’t put off updating your house or attic home insulation any longer, especially when there are home insulation renovation grants available to help you pay for it! Contact Eco Spray Insulation immediately to find out whether you are qualified for one of the Ontario incentives!

By doing these, we are not only saving money on energy bills but the environment as well. The daily increasing use of energy has a high impact on climate change and we can all do our part by following these tips. In this article, we will take a look at some tips on energy saving, to somewhat help Ontarian homeowners create a better understanding of energy efficiency and hopefully make them take action today. 

Home Insulation

Home insulation is the gold standard of energy efficiency. As aforementioned, you can expect to save up to 45% on energy bills when insulation is added to your building. There are several insulation methods and each creates an effective air barrier that prevents heat flow. When insulation is added to your building walls, attic, basement, it can seal all gaps and cracks, making this way a more comfortable living, working, or storage space that also necessitates less energy for heating and cooling. 

And insulation also serves as a sound barrier, insect and rodent repellent, fire retardant, and it can increase your property value by a whopping 3 up to 6%. What to know more about insulation? Well, keep in mind that different insulation methods deliver different R-Values. In short, R-Value is the standard that measures the performance of insulation material. The higher it is, the lower your energy bills will be. 

With that said, spray foam can lower your electricity bills by up to 45% which is quite impressive when compared with fiberglass insulation (25%) and cellulose insulation (25 up to 30%). What you will also need to know is how to hire an insulation contractor. See, the installation process is key to enjoying the benefits of insulation for decades to come and if it is not completed successfully, you will more likely lose money rather than save. Before hiring a Toronto moving company and relocating, make sure to check if the new house has the insulation installed or not.

Energy Efficient Gadgets

Although energy-efficient gadgets are more expensive in the beginning and for some might also be cost-depriving, you can expect the initial investment to pay off with the passing of years by saving on energy. Understandably, energy-efficient gadgets use less energy for the same tasks without compromising the quality. Since heating and cooling “is to blame” for 60% of your electricity usage, a smart/programmable thermostat is where you can start.

 You can further increase your energy preservation efforts by switching to LED light bulbs and using low-flow showerheads (more about them below). Other energy-efficient gadgets we recommend using are modern boilers (can avoid heat loss that escapes up the flue) and solar panels. You can significantly save on energy with the latter, but the installation and maintenance cost can be too much for the average homeowner. And to further guarantee the functionality of your home insulation, you can choose to install new and energy-efficient doors and windows. 

Easy Practices to Save on Energy at Home

Use energy-efficient light bulbs

Switching your conventional light bulbs to LEDs can lower your monthly energy bills significantly and that can be an advantage in the long run. The old traditional incandescent light bulbs need anywhere from 25-80% more electricity than light-emitting diode bulbs (LEDs), Halogen incandescent bulbs, and compact fluorescent lights (CFLs). Although energy-saving light bulbs are more expensive, their longer lifespan and energy conservation will pay off. 

Use natural light more

Use natural sunlight as much as you can. One south-facing window, for example, can illuminate anywhere from 20 up to 100 times its area. And during this time of the day, turning off one 60-watt bulb for 4 hours can save you up to $8 over a year. 

Take shorter showers

Hot water is expensive. If a family of two would cut their shower time by 1 minute, they could save up to $40 a year on electricity. Switching to low-flow showerheads can also lower water consumption and eventually decrease water bills significantly. 

Maintain your AC unit

For your air conditioner to run smoothly and efficiently, it needs to be maintained continuously. What you can do is swap out the old air filters with new ones every at least 90 days. You can also decrease its energy consumption significantly by removing anything that might be blocking the vents. 

Turn off not in use electronics, appliances

Turn your appliances off standby mode and you can save up to $50 a year. Rest assured as many electronic devices (TVs, printers, computers, fax machines) can be plugged off without compromising their functionality. 

Fix any leaky plumbing fitting

Leaky faucets can waste up to 11.000 liters of water each year. Fixing them can save you up to $40 a year. 

Turn off the AC on your way out

That’s a no-brainer! Turning off your air conditioner when not needed can save on energy bills. In addition, a programmable thermostat can further help you lower energy use for heating and cooling.

Draft-proof your house

Last but not least, take a survey on your house perimeter and check for any drafts. You can apply weatherstrips for your doors and windows, re-caulk where necessary, and install new door sweeps. 

Why Choose Eco Spray?

Eco Spray Insulation team is proud to be operating in the Greater Toronto Area and the suburban communities since 2008. Throughout the years, we have established ourselves as experts in energy-efficient building practices like insulation systems are. Whether be a small maintenance issue or a basement to attic project, our team of professionals serves every customer with the highest standard of workmanship. Contact us to receive a free estimate.

This is because water might collect around your home due to clogged or grading eaves and downspouts, or saturated earth around your building can without question lead to rotting wood or a damp basement. As it wasn’t enough, even daily activities like cooking, cleaning, showering and even plants can add moisture to a house. Other sources of moisture in a home include snowmelt, humidity, and fog, rain, humidifiers.

And this way moisture becomes the homeowner’s worst nightmare. As condensation paves the way to excess moisture, the latter becomes dangerous if the problem is not solved. Moisture indoors can expose residents to respiratory disorders and it is the number one source of mold growth and building structure damage. So how to prevent condensation on interior walls? Read on…

How insulation prevents condensation?

Condensation becomes a problem when interior walls lack insulation. See, an insulation system would not be considered complete without preventive measures against moisture accumulation. And as stated on the Ontario Building Code, quote: Each section of a building that separates the inside from the outside and vice versa must have:

• A thermal barrier
• A vapour retarder
• An air barrier

While a thermal barrier and an air barrier work towards a more energy-efficient home that has little to no drafts, the vapour retarder (vapor barrier) is needed to control moisture indoors. It prevents water vapor from moving into building assemblies (walls, crawl spaces, and attic) where it can condense into liquid water within the structure

How does a vapor barrier work in cold climate areas?

Vapor retarders, vapor barriers, or vapor diffusion retarders, are usually found as polyethylene plastic that is applied to the inside face (the warm face) of stud frame walls. They have been used for years to minimize condensation inside the walls. To understand the importance of a vapor barrier, simply imagine (images below) a cross-section of a wall in winter (inside-insulation-outside). The outside area is normally cold and the inside area is a heated space (warm).

Now, if a vapor barrier is not set in the wall, droplets of condensation are going to be formed in the wall cavities. This would then lead to moisture accumulation and poor indoor air quality. But this is why a vapor barrier is applied to the warm inside part of the wall. When in place, warm air can not make its way into the wall cavities. The latter remains dry and keeps moisture far from your walls.

Spray foam insulation 3in1 – vapor, air, and thermal barrier

As mentioned above, a building structure needs air and a thermal barrier in addition to the vapor barrier we already discussed. When it comes to air and thermal barriers, there are several insulation materials that manage to create an airtight seal that eventually reduces energy bills by keeping heat inside and vice versa in the summer months. But as good as it may seem, some materials cannot be used for every application. Through air movement or leaks, moisture can get trapped inside the material of fiberglass insulation and lead to the growth of mold and mildew. When it happens, it can significantly lower the insulation capabilities and also cause serious damages to the building structure. 

This is why we recommend using spray foam for your complete building envelope. A spray foam insulation system acts as a thermal, air, and vapor barrier, and additional polyethylene sheeting is not necessary. Spray polyurethane foam does not absorb moisture and at the same time, it prevents leakage by sealing air gaps. 

No fiberglass or mineral wool this time

Here at Eco Spray  Insulation, we highly recommend using spray foam for your home’s insulation needs and even more when it comes to preventing condensation on interior walls. See, other insulation methods like fiberglass and mineral wool are air-permeable materials that can sometimes allow moisture to condense and collect, which will lead to what you want the least – mold growing within your house walls. If you have an older home and are spotting drafts, unusual smells, or hot or cold spots, it can be because your interior walls contain this type of insulation material. Whether your home is new or old, it’s worth examining to find out how it is insulated, and what we can do to improve or replace the insulation if necessary.

Another reason to add insulation to your attic and basement walls 

A Canadian winter calls for a well-insulated house. By insulating your attic and basement you are lowering your monthly energy bills and increasing your liveable space while protecting your family members from moisture accumulation. But as with interior walls, when a basement or attic is not properly insulated, warm air can come into contact with home walls which are naturally cooler due to the low temperatures on the other side. The warm air will condensate and this will give mold a good head start. Adding insulation to your attic and basement, you can prevent this issue and keep your house safe and healthy. 

Why Choose Eco Spray?

Eco Spray Insulation Company is proud to be serving the Greater Toronto Area and the suburban communities with insulation services of the highest quality. With the passing of years, we have established ourselves as experts in commercial and residential insulation. Our services include, but are not limited to, attic insulation, basement insulation, insulation removal, and air barrier systems.

According to our client’s requests, and depending on the project, we use conventional insulation methods (cellulose and fiberglass) and our winning product – spray foam. Simply let us know when you are ready to get started and our team of professionals can help you access the most inaccessible parts of your house, get rid of mold for good, and enjoy the benefits of insulation for decades to come. Contact us to get a free estimate today.

Pipe insulation, on the other hand, plays several less dramatic roles in the home. These not only save money on utility bills but also make life easier for the owners of both residential and commercial buildings.

Heat Gain and Loss Reduction

One of the most neglected advantages of pipe insulation is its ability to reduce heat loss and gain. In a home without adequate pipe insulation, the hot water loses heat, and cold water gains heat as it passes through the plumbing lines. When pipe insulation is used, this otherwise inevitable effectualness is considerably reduced. 

In the case of a hot-water pipe, it may not seem like a huge deal that the plumbing run doesn’t lose heat. The benefits are substantial: you save money on your monthly energy bills. So you won’t have to wait as long for hot water to reach your kitchen or bathroom fixtures.

Condensation Management

Home insulation helps minimize condensation when the surfaces of plumbing pipes are cooler than the surrounding air. Which, if left unchecked, would erode the pipes and fittings over time, eventually leading to a catastrophic collapse. 

Condensation, though it may seem unimportant, is a regular occurrence, especially when cold-water lines come into touch with warm, humid air. Warm air is kept out of the pipes using vapor barrier-wrapped pipe insulation.

Another benefit of pipe insulation is that it protects persons as well as pipes from damage caused by contact with extremely hot or cold piping.

Selecting Your Insulation

Pipe insulation comes in a variety of forms, each constructed of different house insulation materials and capable of insulating to varying degrees. Some are better suited to hot-water applications, while others have the vapor barrier needed to prevent condensation in a cold-water line. The following are the key types of home insulation:

Conventional foam insulation

It has a slot on one side that allows it to easily fit over existing pipes. It’s a good idea to tape the slits shut after it’s in place to improve the product’s insulating ability.

Self-sealing foam insulation

Unlike traditional pipe insulation, self-sealing foam insulation has an adhesive along the slit. Remove the tape and push the adhesive strips together to complete the project.

Spray foam insulation

Spray foam pipe insulation excels where there is limited space between the water pipes and the outer walls. Often is installed by experts with pressurized containers.

Fiberglass pipe insulation

Fiberglass resists heat effectively, this form of hinged, paper-coated rigid fiberglass insulation is most commonly employed where pipe temperatures are extremely high.

Benefits vs. Costs

Is it ever a bad idea to insulate pipes? “The only time I can think of where pipe insulation would be a negative idea is on radiant heating or cooling loops. In which insulation would actively work against the design of the pipe system.” 

Installing pipe insulation is energy-saving and provides peace of mind in all but a few cases, but does the value exceed the cost? Whether or not you hire a contractor may have an impact on this. Doing the job yourself—which is usually not difficult—tips the balance sheet in your favor, whereas hiring help may or may not be worthwhile depending on where you reside.

The Importance of Pipe Insulation

Reduced Utility Costs & Thermal Performance

Pipes require proper house insulation to function properly. Temperature consistency is critical in natural gas pipes, whether hot or cold. By preserving the temperature from pipe entry to exit, adding industrial pipe insulation improves process control. This can result in higher energy efficiencies, which can contribute to lower operating expenses.

Condensation

When temperatures aren’t kept consistent, pipes might condensate, resulting in pooled water. Condensation can be reduced with proper insulation and the application of a suitable facing.

Controlling the sound

Pipes can produce vibrations or even hammering noises while in use. The absorption of these high-pitched operational noises might be aided by pipe insulation.

Safety

Pipes with elevated temperatures can be dangerous to come into contact with. By reducing heat transfer, fiberglass pipe insulation can create a protective layer over the pipe surface. You’ll need insulation that can protect you from fire and slow the spread of flames in these high temperatures.

Expertly Conceived

Pipe insulation that comes in a clamshell form, making it easier to seal in place, is available for quick and easy installation. Use house insulation with a facing that creates fewer creases and is simpler to wipe clean for a clean, polished look in the area.

By diligently following these tips, you can significantly minimize the risk of expensive problems arising and safeguard the long-term value of your property. Don’t underestimate the importance of summer maintenance – it’s an investment that pays off in the form of a healthy and well-maintained home.

Outside Power Washing

Use a power wash with a mildew remover to keep your house clean and beautiful. This lets you remove any mold or mildew that may have developed due to the summer’s high humidity and heat. Make sure to power wash your siding with a remover that is appropriate to your home’s siding to keep it looking good for longer. You should also power wash your deck and porch because you will most likely be barbecuing with family and friends.

Examine Your Entire Residence

Make a careful inspection of all of your belongings. Check to see if any doors or windows need to be upgraded, and replace any screens that have been damaged throughout the winter. You should also inspect your home’s siding and roof for any damage and make any necessary repairs. Spend a quiet day tending to your garden to keep your front and back yards looking lush and lovely.

Examine Your Insulation

Once you’ve completed a thorough inspection of the exterior of your house, it’s time to focus on the interior. Home insulation plays a vital role in both saving money on utility expenses and ensuring year-round comfort. By effectively preserving cool air during hot summer days, insulation allows your air conditioner to work efficiently when needed. Similarly, it helps keep your home warm during colder months. As you assess the insulation, pay close attention to any visible cracks or gaps that may require filling. It’s important to address these issues promptly to prevent air leakage. A

Additionally, be mindful of any signs of moisture or dampness, as they can lead to the growth of mold and harmful germs in your living space. Prioritizing insulation maintenance not only enhances energy efficiency but also promotes a healthier indoor environment. Trust in the power of quality insulation to keep your home comfortable and your utility bills in check.

Make an Appointment For an Inspection

Summer is a time for you to enjoy yourself and spend quality time with your loved ones. Eco Spray Insulation insulation contractors can assist you with a comprehensive insulation evaluation of your home to ensure that your home insulation is in good functioning order and that your property is in good condition. Our team of specialists can inspect your roof for pests, ventilation, skylights, air or water leaks, and insulation issues.

How does it work?

Please provide us with your contact details. Eco Spray Insulation will get in touch with you to set up an appointment. Please contact us at (416) 860-6664 or info@ecosprayinsulation.ca. After that, you’ll meet with our estimator, who will provide you with details of your insulation job. You will receive a customized proposal with a project description, additional options, and a complete price. Please do not hesitate to contact us if you have any questions.

We are aware of how costly it is to keep your home at tolerable temperatures during the summer. The cost of cooling your home might easily account for more than half of your total energy expenditure. 

Fortunately, proper insulation can help you save money by making your home more energy-efficient while keeping it cool. Here’s all you need to know about summer insulation problems in your home.

What Areas in Your Home Need Insulation?

If you don’t know where your house requires insulation, you won’t be able to detect summer insulation difficulties. Consider a few key areas that require a barrier while repairing any insulation difficulties. If you don’t have insulation in these areas, you may easily install it and cure your problem.

Your attic is one of the most important places to add insulation. Even if you don’t spend much time there, it can accumulate a lot of heat, which you don’t want to transfer to your living rooms. The floor joists should be insulated, and if your attic has one, the access door should be insulated as well.

Of course, you’ll want to insulate all of the external walls. Hot air can enter your home through the external walls, and cold air can depart through the external walls. All of your outside walls require insulation if you want to keep your home cool.

You might also wish to wrap your ducts in insulation. You want to restrict the cold air from escaping as it passes through your ducts. So, if you want to avoid wasting energy, you should insulate your home’s pipes.

Summer Insulation Issues in Your House

Even if you ensure that problem areas are well insulated, problems may arise during the hot summer months. If you detect these problems, conduct another assessment of the affected area to determine whether your present insulation needs to be repaired or replaced.

You may experience insulation issues even if you know you have insulation in your attic, along the outside walls, and around your ducts. Some of your rooms may have drafts, or some rooms may be substantially hotter than others. 

Drafts

There could be a problem with your attic if you detect a draft. Your walls, doors, and windows, on the other hand, could be to blame. Make sure there are no leaks in the attic’s insulation.

You should also double-check that the doors and windows in the issue room close correctly and that the insulation is in good shape. If something isn’t quite right, you can replace the insulation or hire someone to reinstall your door or window so that it seals properly.

Hot Rooms

If one room in your house is considerably hotter than the rest, there’s probably a problem with the insulation. If the room in question is on the top floor, however, this may not be the case. Compare a room to other rooms on the same floor to see if it has an insulation problem.

All of the rooms’ windows and outside doors can be examined. If that one room is still significantly hotter than the others, you’ll need to investigate the insulation.

Staying Cool

In some circumstances, you’ll be able to tell if your home has a summer insulation problem. Maybe one of the rooms is much hotter than the others. Perhaps you’re noticing a draft throughout your home.

You should, however, be aware of where you already have insulation. If you don’t have any in one room, try installing foam insulation to see if that helps. If not, you can inspect several areas of your home to determine the source of the problem.

Why Eco Spray Insulation?

At Eco Spray Insulation, we take insulation very seriously. This necessitates dedication to professional installation and the use of tried-and-true materials. Our knowledgeable insulation installers can help you determine which type of insulation is ideal for your application.

Whether you need spray foam insulation installed, fiberglass batt insulation installed, or old insulation removed, Eco Spray Insulation has you covered. Also, if you want to beat the heat this summer with new insulation or house upgrades, Ontario homeowners can get up to $5000 in-home renovation rebates through the Home Efficiency Rebate program, making it even easier to see a return on your investment.

Check out our gallery to see our installers in action or to see what an insulation upgrade/retrofit looks like, check out our gallery for a collection of amazing images taken by our installers. If you have any concerns regarding how to increase the insulation in your home or want to know which rebate program you could be eligible for, please contact our Customer Experience Team at (416) 860-6664 or leave a message on our website.