In this guide, we’ll walk you through why basement insulation is essential, the best materials to use, how to handle moisture issues, and what to expect during the insulation process.

Why Basement Insulation Matters

Basements in Canadian homes are exposed to extreme temperatures, ground moisture, and condensation. Without insulation, they can become:

• Cold and damp in winter
• Muggy and humid in summer
• Breeding grounds for mold and mildew
• Energy drains that increase utility bills

Proper insulation transforms a basement from an uncomfortable, moisture-prone space into a dry, warm, and usable area—whether for storage, living space, or a home office.

Benefits of Insulating Your Basement

1. Moisture and Mold Control

One of the biggest threats to basements is moisture. Insulation—especially when paired with air sealing—helps prevent condensation and water vapor from penetrating the walls, reducing the risk of mold growth.

2. Improved Energy Efficiency

Basements can account for 20–30% of a home’s total heat loss. Insulating the walls and rim joists reduces heat loss, lowers energy consumption, and eases the load on your HVAC system.

3. Comfortable Living Environment

No one wants to walk into a freezing basement. Insulation helps regulate temperature, keeping the space warm in winter and cool in summer.

4. Soundproofing

Insulated basement walls and ceilings also help reduce sound transfer from the upper floors or adjacent units in multi-residential buildings.

5. Increased Home Value

Finishing your basement with proper insulation is a great investment. It adds livable square footage and enhances the resale appeal of your home.

Step-by-Step: How to Insulate Your Basement Properly

Step 1: Inspect for Moisture or Water Intrusion

Before adding any insulation, it’s critical to:

• Check for water stains or damp areas.
• Fix any leaks or cracks in the foundation.
• Ensure proper grading around your home’s perimeter.
• Install a sump pump or dehumidifier if needed.

Tip: Never insulate over a wet or unsealed basement wall—this can trap moisture and lead to mold.

Step 2: Choose the Right Insulation Material

The best insulation for basements must be moisture-resistant, high R-value, and ideally serve as an air barrier. Here are top options:

1. Closed-Cell Spray Foam Insulation

• Acts as an air, vapor, and moisture barrier
• Excellent R-value (approx. R-6.5 per inch)
• Adheres directly to concrete or masonry
• Prevents mold and air leakage

2. Rigid Foam Board (XPS or EPS)

• Cost-effective and moisture-resistant
• Must be sealed at joints and covered with drywall
• Offers consistent insulation without mold risk

3. Mineral Wool (Rock Wool)

• Fire-resistant and moisture-tolerant
• Often used in combination with rigid foam
• Great for soundproofing

Avoid fiberglass batts directly against basement walls—they can absorb moisture and promote mold.

Step 3: Air Seal Key Areas

Air sealing is just as important as insulation. Focus on:

• Rim joists (where the wall meets the floor above)
• Cracks or gaps in walls and around windows
• Penetrations for plumbing or electrical

Closed-cell spray foam is ideal for these areas because it both insulates and seals gaps simultaneously.

Step 4: Install Vapor Barrier (If Needed)

Depending on your insulation type and local building code, you may need to:

• Add a polyethylene vapor barrier over stud cavities.
• Or, skip it entirely if using spray foam (which acts as a vapor barrier).

Consult your contractor or local code for specific requirements in your region.

Step 5: Frame and Finish the Basement

Once insulation is installed:

• Frame your walls with moisture-resistant materials.
• Add drywall or other wall finishes.
• Install flooring materials suitable for basements (avoid solid hardwood).

Proper insulation helps protect all these layers from future moisture damage.

Cost of Insulating a Basement in Canada

The total cost varies depending on the size of the basement, insulation type, and labor rates. Here’s a general breakdown:

Estimated Cost for 1,000 sq. ft. Basement: $4,000 – $10,000+

While spray foam has the highest upfront cost, it offers the best long-term benefits in moisture control, air sealing, and durability.

Should You DIY or Hire a Pro?

While it’s possible to install rigid foam boards or batt insulation yourself, spray foam insulation requires specialized equipment and training.

For large projects or those involving moisture-prone areas, it’s wise to hire a certified professional. Companies like Eco Spray Insulation specialize in basement insulation using closed-cell spray foam and can ensure that your home meets code and performs efficiently year-round.

Frequently Asked Questions (FAQs)

Q: Can I insulate a basement without finishing it?

Yes. You can insulate basement walls with foam board or spray foam and leave them exposed. Just ensure materials meet fire safety codes.

Q: Will basement insulation help reduce heating bills?

Absolutely. Basement insulation can cut your overall heating and cooling costs by up to 30%.

Q: What’s the best insulation for basement walls in Canada?

Closed-cell spray foam is often considered the best option due to its moisture resistance, air sealing, and thermal performance.

Transform Your Basement – Insulate for Year-Round Comfort and Moisture Protection!

Insulating your basement isn’t just about staying warm—it’s about protecting your home from moisture, reducing energy costs, and making your space truly livable. With the right insulation approach—especially one that incorporates air sealing and moisture control—you can transform your basement into a dry, cozy, and energy-efficient environment.

Whether you’re planning a full basement renovation or simply looking to improve comfort, investing in proper insulation is one of the smartest upgrades you can make.

By insulating basement walls you will contribute to both moisture and mold growth prevention as well as keep pests out of your home. This article, provided by Eco Spray Insulation, offers a wealth of information on the insulation of basement walls, including its benefits and various insulation options that you may wish to consider before embarking on your basement insulation project.

Why Insulating Basement is worthy of your property? 

Basement insulation, as a wise home investment, is worth considering for a number of reasons including increased home comfort, energy savings, indoor quality, home value and reduced noise levels. By making your home more energy-efficient and comfortable, basement insulation can enhance your quality of life and save you money on energy costs.

You may make your basement a comfortable location by hiring a local insulation contractor to insulate the space underneath your home. The main benefit of insulating basement walls is to stop heat from transferring between the outside surfaces of your house, such as the foundation. After being air sealed and insulated, your basement will be protected from Canada’s harsh winters and exhausting, hot summers. Your home will have more consistent temperatures throughout if the basement is better temperature-controlled.

Why Spring is the Perfect Season for Insulating Basement Walls?

Several factors make spring the ideal time to insulate basement walls:

• Temperature Stability →  Since temperatures during the spring are frequently mild and steady, installing basement insulation is made easier because there is less risk of extremely hot or cold weather.
• Increased Energy Efficiency → Insulating basement in the spring will help you get your house ready for the hot summer months by reducing the need for air conditioning, which will result in cheaper energy bills.
• Reduced Moisture Levels →  Since springtime humidity levels are often lower than those of summer or fall, now is the perfect time to install basement insulation to stop moisture from entering and lower the chance of mold growth.
• Shorter Installation Periods → Since foam contractors are often less busy in the spring, scheduling the installation of your house insulation may be simpler and quicker.

• Comfortable Indoor Atmosphere All Year Long → By insulating basement walls in the spring, you can improve your home’s year-round comfort by helping to maintain constant temperatures and reducing drafts.

By taking advantage of spring’s advantages, you may get your house ready for the warmer weather and enjoy a more cozy and energy-efficient living environment.

Which is the Best Home Insulation Option for Insulating Basement Walls?

For insulating basement walls, spray foam insulation is a high-performance insulation solution that provides a great number of advantages. 

Both open cell and closed cell spray foam are available options that can be applied to basement walls. Open cell spray foam for regions above ground and closed cells for portions below ground is a common recommendation from Eco Spray Insulation foam contractors. 

Closed cell spray foam is a perfect vapor barrier that keeps moisture from passing through it, but it can also conceal leaks that could cause mold. Furthermore, open cell spray foam won’t hold water, and leaks will be obvious.

• Premium Insulation Performance →  Spray foam insulation has a greater R-value per inch than other types of insulation, which makes it more efficient at preventing energy transfer through your walls. R-value is a measure of insulation’s capacity to resist heat flow.
• Air Sealing Capabilities →  Spray foam insulation swells to fill in voids and crevices in your walls, forming a smooth air barrier that aids in stopping air leaks and moisture intrusion.
• Moisture Resistance → Spray foam is a moisture-resistant insulation material and can help stop the formation of mold and mildew in your basement, improving indoor air quality.
• Durability → Spray foam insulation, when incorrectly installed, can endure for many years before needing to be updated, offering a powerful and durable home insulation alternative.
• Versatility →  Spray foam is a versatile and efficient option for insulating the whole basement because it can be utilized in a range of applications, such as walls, ceilings, and floors.

Why Basement Insulation Maintenance and Upkeep is important during Springtime?

As mentioned before, basement insulation is extremely beneficial for any property type. Home insulation should be correctly installed in your home’s basement by the right professionals who have significant knowledge and experience in insulating basement walls, ceilings, foundations, etc. 

• Ensure Insulation Performance → Basement insulation can become damaged or compacted over time, which reduces its ability to stop heat transfer through your walls. Regular insulation inspections and upkeep can assist find any problems and fix them before they affect the function of your home insulation.
• Keeping Moisture Out →  Insulation that gets wet or damp loses its insulation capabilities and turns into a haven for mold and mildew. Your basement walls can stay dry and avoid moisture infiltration with routine cleaning and upkeep.
• Maintaining Indoor Air Quality → Deteriorating or broken basement insulation may release hazardous particles into the air, lowering the quality of your indoor air. Your home insulation can remain intact and contamination-free with regular maintenance.
• Preventing Structural Damage →  Your basement walls and foundation can sustain structural damage from moisture infiltration and mold growth, which will require expensive repairs in the future. These problems can be avoided with routine maintenance, which will also protect your home’s structural integrity.

Consider insulating basement walls this spring if you want to increase the comfort of your home and increase its energy efficiency and indoor air quality. To get started, get in touch with the Eco Spray Insulation project manager and take a free project estimation on your upcoming home improvement project on insulating basement walls. 

Keeping Your Summer Cottage Warm

Summer cottages typically have little insulation, and they don’t require it if they’re only used during the summer. When the temperature difference between inside and outside is only a few degrees and air circulation from open doors and windows are regular. The reasons for insulating, such as keeping moisture from gathering between walls, are rarely an issue.

When it comes to insulating your cottage for the winter, there are a few things to keep in mind. One is that you’ll need to install a vapour barrier, in January the temperature difference between your warm and cozy cottage and the freezing outdoors might be more than 30 degrees. Warm air can condense on the inside of the walls as a result of this discrepancy. Mold can build in the walls or attic due to moisture, which can be very troublesome.

Many contractors will recommend installing blown in or fiberglass batt insulation directly into the walls or attic when choosing an insulation solution for the cottage. Without the addition of a vapor barrier, it is also likely to produce dampness and mildew. A vapor barrier is an expensive add-on that can’t be installed without tearing down existing walls.

For your cottage, there’s a better option

Spray foam insulation is Eco Spray Insulation’s best choice for insulating your cottage for the winter. Spray foam is great because it serves as both insulation and a vapor barrier, keeping heat in while keeping moisture out. It has a high R-value, so it keeps heat in while keeping moisture out. 

Spray foam is a liquid that expands into walls or between joists, and it may be applied without tearing down walls. When compared to other modifications, spray foam insulation can have one of the most significant cumulative benefits on your cottage energy bills. Performs an outstanding job of sealing the little fractures and air leaks that allow your heated air to leave.

The ideal spots to ensure effective air sealing while insulating your cabin for the winter are:

• Under the rafters, to be precise.
• The crawl space interior.
• Within the confines of closed or empty wall cavities.
• Around the perimeter of windows, doors, and vents.
• Wires and plumbing pipelines should be avoided.
• Between the studs of the wall.

Adding Insulation to the Attic

Your attic is one of the greatest places to insulate when properly installed. In the winter, attic insulation helps manage your indoor temperature by lowering your heating expenditures. New attic insulation will assist create a more stable indoor environment that keeps moisture and temperature balanced regardless of the season. 

When it comes to insulating your cottage for the winter, the attic is a requirement, as it will help protect you from the elements while also lowering your energy consumption. Spray foam’s capacity to both insulate and seal air leaks is where it really excels. It will keep your cottage pleasant, avoiding air conditioner loss in the summer and retaining heat in the winter.

Upgrading your cabin and removing old insulation

Prior house insulation must be removed before you can begin insulating your cottage for the winter. Older types of insulation continue to deteriorate or underperform as they age, potentially affecting airflow or circulation in your cottage. Working with professionals on your cottage will improve your comfort and enjoyment; not only will the Eco Spray Insulation contractors ensure a clean and safe removal, but they will also inspect your cottage for any air leaks or damage that needs to be repaired.

While spray foam insulation gets a lot of attention at Eco Spray Insulation, there are two more types we install and suggest for insulating your cottage for the winter.

Blown in Insulation

Insulating attics, roof cavities, and exterior walls with this sort of insulation are simple and cost-effective. Fiberglass and cellulose are the most common materials used in blown-in fabrications. Both have a similar R-Value and can be used to increase the efficiency of existing insulation. 

Blown in insulation is suitable since they do not attract pests and are fire-resistant. They, like anything else, require appropriate installation to guarantee that they perform to their full potential.

Fiberglass Batt Insulation

This well-liked product is suitable for both attics and walls. Fiberglass batt insulation can be utilized in the attic or in the walls, depending on the project. This non-combustible insulation helps to absorb moisture as well as sound. 

This product is best installed by a professional when insulating your cottage for the winter, as an amateur install may result in poor performance and increased air leakage.

The Advantages of a Four-Season Cottage

Insulating your cottage will allow you and your family to enjoy your lakeside escape all year long. Also lowers your energy expenses, reduces air leakage, and stabilizes inside temperatures. 

Different insulation solutions, as well as professional insulation installation and air sealing, will ensure that you are comfortable regardless of the season. Because of the age of many cottages and their often handcrafted construction methods, they frequently have insufficient air sealing and insulation.

Spray foam insulation is one of the best insulation materials for insulating your cottage for the winter, according to professional spray foam insulation contractors. It’s the ideal home installation since it serves as both a moisture barrier and a foam insulator, sealing the space, inhibiting moisture, and providing high R-Values. Insulating your cottage for the winter has benefits all year round.

Get in touch with our project manager and learn more details about spray foam insulation and how it can benefit your cottage.

What is R-Value? 

The R-Value measures the capability of an insulation system to keep a building compact and block heat flow. The higher the R-Value, the greater the insulating effectiveness power and resistance to heat flow.  In other words, the material with a high R-Value is a better insulator than the material with a lower value. The amount of insulation needed depends on the type of insulation you are using, climate, type of heating, the R-Value you want to achieve, and the size of the space you are insulating. R-Value is not the only thing you need to consider when choosing the insulation you use in your house. Airtightness is also important because air leakage accounts for 40 percent of a home’s energy loss.

But a higher R-Value isn’t always required for every home because there is no “best” R-Value. The requirements for certain R-Values are within the Ontario Building Code. Based on its climate different zones require a different minimum R-Value. Properties that are located in cold climates require a minimum R-Value of 6, while properties located in warmer climates require an R-Value of 3 or 4. The one that suits your environment’s unique conditions most effectively is the best insulation R-Value.

What are Some Common R-Values?

The total R-Value of a wall or ceiling, depending on application, may need to be higher in which case, a thicker layer of insulation or a more effective type will be required. Which will lead to a higher overall R-Value within the house. The R-Value of an insulative material is measured “per inch”, which indicates the insulative material’s ability to resist heat per inch of thickness. The R-Value of a wall or ceiling measures the insulation material’s ability to resist heat flow. The highest R-Value when measured by inch spray foam has it at about 3.7-6.5 per inch, open and closed cell respectively. Blown-in fiber insulation is at about 3.5 per inch and fiberglass batts are at about 2.9 per inch.

What Does R40 Insulation Mean?

A few years ago attic blown-in insulation in Ontario was R40, and its thickness was about 10 inches of blown-in cellulose and more than 12 inches of blown-in fiberglass. But now it has changed and according to the Ontario Building Code 2020-2021 and to the professionals, the recommended R-Value for attic insulation in Ontario is between R50 and R60, 18 inches blown-in cellulose and 22 inches blown-in fiberglass. Keep in mind that if you insulate your attic not only, you will keep indoor temperatures comfortable and consistent, but also it will create a barrier to sound.

Also, air sealing is very important because air can leave through the many leaks in the attic, or air can enter from outside and can account of heat loss. Poor attic insulation is responsible for 25 percent to 30 percent of heat loss. A higher R-Value means a better-insulated attic. If you have already insulated your attic, you can do a calculation to see the R-Value just by looking at the type of insulation:

• Rock Wool –  looks like real wool and you may find it in black, yellow, and gray color.  2.8 * Insulation depth = R-Value
• Fiberglass – looks like loose fibers with a light pink, white or yellow color. 
• 2.5 * Insulation depth = R-Value
• Cellulose – looks like small gray flat pieces of fibers.
• 3.7 * Insulation depth = R-Value

Why is Spray Foam Insulation the Best?

In comparison to other types of insulation, spray foam is more environmentally friendly. Spray foam insulation is known also as foaming insulation or sprayed insulation. This type of insulation is a two-part liquid insulation material that insulates and air seals wherever it is applied in the property. And air sealing a building helps address moisture which reduces the risk for mold and mildew growth. There are two types of spray foam, open and closed cells.

Open cell is used for interior applications such as the underside of roof decks, attics, wall cavities, basement walls, etc. Open-cell foams low-dense structure allows moisture permeability, to help contribute to moisture management, and provides sound dampening qualities. Its R-Value is 3.5 per inch.

While closed-cell insulation is used in exterior and interior applications. It is a rigid material that helps reject lots of water, adds wall racking strength as well as impact resistance. Closed-cell foam has a higher R-Value than any insulation, it ranges from 5.0 to 7.0 per inch.

Regarding the thickness of the spray foam insulation, it depends on certain factors. Ontario Building Code recommends that the insulation levels should be relative to the part of the structure being insulated and to the climate zone. It is very important to examine also the degree of moisture permeability that is needed. These are the key factors that can determine the R-Value and also which type of insulation open or closed cell should be installed.

Choose Eco Spray Insulation

It is sufficient for the average homeowner to understand the basics of R-Values. Although it is important to have a professional contractor managing the installation. Our insulation professionals have extensive product knowledge and experience, they can access, interpret R-Values and performance in order to deliver short and long-term benefits.

If you would like to have one of our insulation experts inspect the insulation in your house, Eco Spray Insulation offers homeowners free insulation estimates to help you to get started. We install quality products and provide a fully comprehensive approach, that includes insulation and air sealing. Contact us at 1-416-860-6664, or by email at info@ecosprayinsulation.ca and our Professional Team will be happy to assist you.

There are two things you can do in order to improve the energy efficiency of your basement: air sealing and basement insulation upgrading. Sealing the air leaks around the perimeter of your basement foundations has a lot of effect on maintaining the energy of the building. If your basement design includes an exterior door, that should also be your main focus for air leakage sealing. At Eco Spray Insulation you will find the required support and expertise to address your basement air leakage and insulation needs. Contact Eco Spray Insulation, your trusted local dealer to have your home inspected and tested for basement insulation needs.

Choosing the Right Location for Basement Insulation Determines the Effectiveness

Depending on the place of the basement you choose to insulate, will determine the effectiveness and the result of your insulation. Many homeowners in the past used to put fiberglass batt insulation in-between the joists of the basement ceiling. But facts considered, this method of insulation does not focus on insulating the basement itself but the living space above it. Thus, if you choose to insulate the walls of the basement instead of the ceiling, then the basement section of the house would become part of the home’s building envelope. Being a part of the home’s building envelope means that the basement is part of the home’s conditioned space, turning it into a more comfortable place. A properly insulated basement will preserve the heat of the hot water lines and of the duct pipes of the HVAC system, which are vulnerable to the outside freezing cold temperatures of the winter.

What are the Best Insulation Materials for the Basement?

When insulating your basement, the focus should be on selecting materials that will block the heat transfer, will not accumulate moisture and will prevent mould growth. There are plenty of insulation materials you can choose from on the market, but they can be grouped into four main categories: Spray Foam Insulation, Fiberglass Insulation, Cellulose Insulation and Foam Board. Eco Spray Insulation has excessive experience and certified experts that will complete your home insulation project from the basement to the rooftop. If you are looking for a local contractor to insulate your basement and turn it into a warmer and more comfortable place, we got you covered with relevant expertise on the insulation methods and the best insulation materials on the market. We have been researching ourselves and now we want to share our expertise and inform our customers on what are the best insulation materials for the basement. Here below we will elaborate on the pros and cons for each group of insulation materials.

Basement Spray Foam Insulation

If there is one perfect place for using spray foam insulation, it would be the basement. This dense insulation material is designed to seal all the air leaks and block the heat transfer of your building. It will also serve as a vapour barrier which will seal the basement and stop cold air from outside getting inside. We have been using spray foam insulation over the years and we could say that it is the preferred insulation material to work with among homeowners and insulation contractors. Polyurethane spray foam is a dense material which unlike other insulation materials does not lose its shape over the years. It fills the cracks and holes and also adds to the structural strength of your building.

We have been using many insulation products and brands in the past, but we have gotten the best of results by using SOPRA-SPF 202 spray foam insulation, by SOPREMA. SOPRA-SPF 202 is closed cell polyurethane foam that is produced by blending two main components, one of the SOPRA-SPF 202 RESIN or SOPRA-SPF 202 LT with SOPRA-SPF ISO, with a 1:1 ratio. What’s even more exciting about this product is its eco-friendliness. It has a zero ODP (Ozone Depletion Potential) and the least of the Global Warming Effect, thanks to its HFO blowing agent. It is one of the few products to have earned the GREENGUARD GOLD certification.  SOPREMA insulation materials are designed for each type of construction insulation, be it commercial or residential buildings. They can be applied in almost all types of surfaces and substrates such as wood, metal, concrete, masonry, etc. Our technicians have mastered the application process of these products, which require the substrates to be free of moisture, grease, and any other dirt prior to application. The benefits of using SOPRA-SPF-202 spray foam insulation include high thermal-resistance value, monolithic insulation, structural strength, and the highest coverage rate for the same quantity of product used.

Pros of Basement Spray Foam Insulation:

• Waterproofing qualities, it does not retain water so it is hostile towards mould or mildew growth.
• Spray foam insulation acts as a vapour barrier, preserving the warm air inside and keeping the cold air outside.
• Soundproofing qualities, it acts as a sound barrier dampening outdoor noises and sounds, creating a more comfortable home environment.
• Adds to the structural strength of the building thanks to its dense composition

Cons of Basement Spray Foam Insulation

• Polyurethane foam is relatively more expensive than the other options for basement insulation.
• It requires proper installation by certified technicians, otherwise, air leaks and moisture related problems will persist even after application.

Basement Fiberglass Insulation

Fiberglass Insulation can be found in the form of loose fill or batt insulation. Its main composition material is plastic which in turn is reinforced with glass fibres, as the name itself suggests. Fiberglass Insulation has been since long used to insulate walls, floors, attics, ceilings, and crawl spaces. It is found vastly used in older homes as the new constructions have switched to more modern and eco-friendly materials.

Pros of Basement Fiberglass Insulation:

• Fiberglass insulation is the cheapest option when you compare it to other options for basement insulation.
• If you are planning to carry yourself the works for the basement renovation, including the insulation process, then fiberglass insulation would be the Do It Yourself (DIY) project.

Cons of Basement Fiberglass Insulation:

• Fiberglass insulation lacks waterproofing properties and so is prone to moisture accumulation and mould growth.
• Fiberglass insulation has a low density and a low thermal-resistance value as a consequence thus does not make the most for blocking heat transfer and preserving the energy of the building.
• Fiberglass insulation is made of small plastic and glass particles which if disturbed can be released into the air, embedded in the human skin, or even inhaled.

Basement Foam Board Insulation

Foam board insulation comes in the form of ready-made solid foam boards, covered with a radiant barrier on one side and used to insulate almost every part of your home. The materials composition of foam boards varies between polyurethane, polystyrene and polyisocyanurate and it can be applied directly to the basement walls for sealing the space.

Pros of Basement Foam Board Insulation:

• Some types of foam board insulation have proved to be water-resistant, preventing moisture condensation and mould growth.
• When foam board insulation is fitted properly into the surface, it will serve as an air barrier.
• Foam board insulation needs little maintenance and can survive undamaged for long periods of time.

Cons of Basement Foam Board Insulation:

• If foam board sheets are not matched perfectly during the application process, it will not provide proper air sealing qualities.
• Some types of foam boards composed of expanded polystyrene can accumulate moisture inside the air bubbles, limiting the thermal-resistance value.
• Foamboard sheets need to be cut and fit into the exact shape of the surface to be insulated, otherwise, the air sealing properties will be compromised and the energy will be lost.

Choose the Best Insulation for your Basement Walls and Ceiling

Basements might be the most neglected areas when it comes to home insulation, but they need as much insulation as the rest of the house. They need to be included inside your home’s building envelope, so your entire home will feel warmer, cozier, and more comfortable in general. When your basement is insulated, it means that your home is protected from outside cold air and pollutants, preventing moisture accumulation and mould growth. If you are looking for a cheap option to insulate your basement this season, then fiberglass insulation and rigid foam boards are the ones to go. But if you are looking for quality insulation that will provide the highest thermal resistance value and air isolating properties, then we recommend spray foam insulation. If you want to experience the full benefits of SOPREMA’s new SOPRA-SPF 202 spray foam insulation product, then call us instantly at (416) 860-6664, at any given time of the day, or send us an email with your insulation requirements for a free of charge and no obligations estimate.

Crawlspaces should be designed and constructed as mini-basements. Crawlspaces shouldn’t be vented to the outside. They ought to have their floors uninsulated, the bottom vapor sealed, their walls insulated and air sealed, and their air conditioned with indoor air.

Traditional vented crawl spaces are often damp, mouldy, and inhabited with pests. They need almost universally been found to be connected to indoor air through many small unintentional air leaks within the floors, partitions, and ducts. Therefore, to make sure both durability and indoor air quality (and save energy), a crawlspace must be kept dry, conditioned to regulate temperature and humidity, and sealed tight to be pest free. This is often particularly important for crawl spaces that contain mechanical equipment—a situation that’s practically guaranteed in buildings that have a crawlspace. Mechanical systems shouldn’t be installed outside of a range in unconditioned space unless there’s no practical alternative. Crawl Space walls should be insulated with non-water sensitive insulation that forestalls interior air from contacting cold basement surfaces—the concrete structural elements and therefore the rim joist framing.

Insulating crawl spaces

The best way to insulate a crawl space would be to try to do it from the bottom up and consider it just a part of the conditioned space as you’d with any basement. We at Eco Spray Insulation recommend spray foam because of the following reasons: 

Spray foam is completed quickly, it’s a high R-value, provides an air and moisture seal, and fills all the small holes. This is often not a DIY job so you should call us and our team will finish the job quickly and professionally. Since it’ll act as a vapour barrier, there’s no got to lay down poly before time; it can go right against the dirt.

When it involves insulating the walls, there are a few of the way to travel about this – code requires any crawl space quite 5 feet high to possess fire protection covering any foam products, during which case you’ll frame a 2×4 or 2×6 wall 1 inch faraway from the concrete wall; sitting it on small chunks of froth will keep it from being in touch with the bottom and absorbing moisture. Spray foam is then applied to the walls behind the studs and into the cavities, you’ll leave enough room to try to do any wiring if required.

The foam must then be covered with the drywall as fire protection, which may be attached to the stud wall. No vapour barrier is required additionally to spray foam. Building codes change and may vary by region, so confirm this locally, but currently, The National code in Canada for instance allows foam insulation without fire protection on crawl space walls that are but 5 feet tall.

Crawl Space Issues and Solutions

A crawl space is an area of limited height underneath the floor of your house. It typically allows just enough room for someone to crawl underneath, hence the origin of its namesake.

Excess water often invades crawl spaces, which can lead to mold and other issues. If moisture is a problem, it is important to identify the source of water. If the moisture is the result of poor circulation, consider installing a plastic vapor barrier on the floor. This will help keep the space dry. If water is coming through the foundation, you’ll need to repair the foundation, something that requires professional help. Once any cracks are fixed, consider installing a French drain around the perimeter of the house to direct water away from the foundation.

It is important to consistently maintain a crawl space. If the process of checking under your home every few months becomes arduous, then you may want to consult a professional who will provide routine maintenance.

Crawl Space Vapor Barriers and Encapsulation

Installing a vapor barrier in your crawl space can cut moisture problems in half, leaving your home better shielded from mold and water damage.

Not only are crawl spaces typically located underneath a home where water runoff is more common, but they’re also often designed with dirt floors, making them a tract for moisture and mould. Installing a correct vapor barrier or crawl space encapsulation can help in preventing basement moisture.

What happens when crawl spaces are neglected?

Crawl spaces are dark, dank, musty, and sometimes moist. Because they’re underground, crawl spaces are a natural breeding zone for the subsequent unpleasantries when neglected.

• Moisture

Moisture within the crawl space can come from a myriad of sources: running water, standing water, or moisture evaporating from the ground. In high-humidity areas and people susceptible to flooding, moisture is even more of a threat. and therefore the more moisture that builds up within the space, the greater the likelihood of the inevitable beast: mold.

Moisture and mold within the crawl space have the potential to rot structural elements, seep into the house and torment your indoor air quality. Even when the crawl space is closed faraway from the house, conditioned air flows steadily between the 2 under the proper conditions. And while venting your crawl space can aid in deterring the smell, the proper variance in humidity between indoors and out forces moisture to evaporate up through the ceiling and into your home.

• Dust and dirt

Dust and dirt are not any stranger to crawl spaces. And, when left to their own devices, can wreak havoc in significant ways.

Any exposed dirt within the crawl space may be a prime vehicle for holding moisture. Installing a vapor barrier to shield exposed dirt from moisture is the initiative to eradicate negative consequences. Additionally , if any of your HVAC piping or ducts reside within the crawl space, they seem to be a guaranteed transporter of dust and dirt particles into your home unless the availability and return ducts are properly sealed.

• Rodents and insects

Everyone’s favorite topic: the creepy-crawlers and four-legged buggers roaming around within the crawl space. But they’re doing quite just roaming down there. First, any existing vapor barriers, insulation or ducts are threatened by termites, rats and other critters looking to chew. Second, these critters use the crawl space as their home, which suggests their residue is within the air, headed into the house through any poorly-sealed ductwork. Air quality: beware.

Out of sight, out of mind — right? Hardly. The damage done by neglecting a crawl space is probably affecting you quite the attention can see. But, there’s still hope for the crawl space

Benefits of insulating your crawl space

Don’t write the space off as a campaign just yet. there is a solution to your crawl space woes: crawl space insulation. Properly installed insulation will provide the subsequent benefits.

• Improved comfort

If the rooms above your crawl space often feel warmer or colder than the remainder of the house, the crawl space is the likely offender. Insulating the crawl space will cause fewer drafts and cold spots within the rooms above, as the temperature is regulated.

• Improved air quality

We mentioned the potential that exists when dust, dirt, moisture and rodents are left to their own devices. Pollutants in your air often cause health issues like asthma or allergies. Fret not; the air you inhale is going to be cleaner with a well-insulated crawl space. Insulation will protect the walls and ductwork to stay the bad air out.

• Save energy

Each time a duct leaks or condensation builds within the crawl space, your HVAC equipment is forced to overcompensate, working hard to manage the air in your home. This equates to a big loss of energy and an overall inefficient system. Proper insulation helps regulate the crawl space’s atmosphere, and is known as by Energy Star because the second largest opportunity to save lots of energy in your home, second only to insulating attics.

• Save money

By ensuring the efficiency of your heating and cooling systems and thereby decreasing energy usage, you will be delighted at the savings on your monthly bills. Additionally, proper vapor barriers, venting, and insulation will create a proactive defense against the openings that rodents and insects use to enter the house, decreasing the likelihood of frequent calls to pest control pros.

Moisture is the key ingredient causing mold in basement areas, but there’s more than just a little moisture that can lead to a mold infestation.

1. Excess Moisture: Leaks, spills, and cracks in your foundation also can cause higher humidity and moisture. If you don’t catch and fix these issues directly, mold will begin growing. Try adding a dehumidifier in your basement to stay humidity and moisture low. Using air con during the summer months also will help decrease the humidity and stop the spread of mold.
2. Leaks in Your Roof and Walls: Water that leaks in from your roof or pipes are one of the causes of mold in basement areas. A leak brings an endless supply of water and moisture to dark areas in your home. Since most pipes and roofs have a layer of drywall and insulation around them, they create perfect places for mold to grow. Because the mold spreads, you’ll start seeing it growing on your walls and ceilings. Our experts have to fix the leaks and repair the moldy areas.
3. Flooding: Excess water in your basement and residential isn’t an honest sign. Flooding causes excess water to leak and accumulate in your basement. Not only are floors wet, but the floodwater will increase humidity making even the dry areas vulnerable to mold. If you don’t start drying the world within 24 hours, mold will start to grow. Fortunately, there are many effective cleaning methods to urge your home to dry fast. One of them is to call us so we can do a professional job.
4. Wet Clothing: Do you exercise tons or have you ever just been available from the rain? Wet clothes are another culprit of mold in basement areas. If you throw your clothes within the basement hamper while they’re wet, mold can start to grow on them. Clean clothes that are left within the washer for each day or longer causes mold to grow on the garments and therefore the washer. The mold can spread from your clothes onto the ground, and in extreme cases, onto the walls of your basement. Always open up and dry your clothes to stay both them and your home free from mold.
5. Condensation: Excess condensation causes mold around windows, doors, cold pipes, and concrete floors. When these surfaces are cold, condensation will form. You’ll find a number of these to be particularly cold during the winter months. Areas with or near condensation are prime areas for mold growth. Carpet over concrete floors can cause mold in basement areas albeit you can’t see it.
6. Poor Ventilation and HVAC: A house with poor ventilation can cause moist stagnant air to supply mold in basement areas and your ventilation. Dirty filters in your HVAC system can house mold and mildew. Moisture gets into the air from steam made by cooking, cleaning, and bathing. Fans and ventilation in your home disperse the moisture to stop mold. However, when the ventilation isn’t working, mold can grow around bathroom fans and within the vents. Putting our best effort, we will make your home a safe place to live in.

Which Part to Insulate in the Basement?

There are three major places where insulation is effective: exterior wall, interior walls, and ceilings. The simplest insulation placement depends on how the basement is employed, also it depends on if the building is already existing otherwise you are constructing a replacement building.

• Wall insulation: Wall insulation is the most significant part of the basement insulation because the utmost amount of warmth is transferred through walls, especially if your surrounding climate is colder within the winter season.
• Ceiling insulation: A general thanks to insulating the ceiling of your building’s basement is fiberglass batt insulation. it’ll make the space within the basement much warmer and thermally stable.
• Floor insulation: once we start constructing a building, we confirm that the inspiration is robust and doesn’t allow any quiet leakage within the building.

Insulating the basement with different products:

Pros of Basement Insulation

• Staying Warm. Gaps, cracks, and poorly insulated walls permit valuable warmth to flee from home. If you set insulation in your walls and ceiling in your basement, it’ll boost comfort and cut heating costs. and through the winter, uninsulated walls don’t just create uncomfortable conditions in your basement, they will also make the primary floor unpleasantly cold.
• Moisture Issues. Ground moisture can enter the house through the inspiration walls. Closed cell SPF foam sprayed onto the within of a foundation can help to stop moisture intrusion through the walls. If fiberglass is the choice for the outside wall insulation, please make sure that the vapor barrier meets local code requirements.
• Prevents Freezing of Water Pipes. In areas where the mercury drops frequently, water pipes get frozen easily within the basements. Thus, basement insulation is the best and cost-effective solution.
• Reduces Energy Consumption. When you insulate the basement, there’s no place for warmth to flee. Thus, maintains the specified temperature within the building which further hampers the energy consumption during the variable climate.

How to Insulate Basement Walls

Spray foam

Spray foam is perhaps the simplest possible insulation material for basements and damp areas. Closed cell spray foam is ideal for locking “out” the water vapour that inherently wants to migrate from your damp basement walls to your finished basement rooms. Spray foam offers several benefits including additional structural stability, great vapor barrier, easily covers pipes, wires, and other utilities and it provides exceptional R values. The issues with spray foam are its a substantial tag (although this may recover with time) and it’s a really messy task. However, if you’ll afford the value and mess then this is often the last word insulation product. We at Eco Spray Insulation, use the best of the products to make sure that we approach the clients requests.

Foam Board

The next best basement insulation method is using foam board products. This is often the tactic that we use most frequently and it’s the tactic that the majority of DIY folks can handle. It’s also quite a bit cheaper than spray foam so it’s a beautiful alternative. There are many foam board products on the market so I suggest you read Foam Board Insulation Types and R Values for a fast education on the various products available. We have the best equipment and our professional team will be there for any request or advice.

The key to using the foam board is selecting the right thickness and sealing it properly to make an efficient vapor barrier. If you’re just getting to use foam board then you’ll presumably need 2 to 4 inches in thickness counting on local energy code requirements. I like to recommend sealing all the joints with Tyvek (or similar) house wrap tape. you’ll also use “Great Stuff” spray foam during a can to seal around all of your utilities and also along the rock bottom of the froth board. For more information on using foam board, I like to recommend you read the way to Insulate Basement Walls with Polystyrene Insulation.

Hybrid Foam & Fiberglass Insulation

The last method that we have used may be a hybrid system of froth board and fiberglass. This method is the least expensive yet I think it’ll perform well in basements that don’t have visual signs of water infiltration. This method shouldn’t be used if you’ve got a history of water, even small amounts.

In this method you’ll be installing a layer of froth board, sealing it as noted above. Then you’ll frame a wall (wood or steel as I don’t believe there’s much difference) ahead of the froth board. Finally, you’ll install fiberglass insulation within the stud cavities. Again the key here is to return up with the right R Value supported local energy codes. Based on our experience you shouldn’t use a vapor barrier over the fiberglass insulation during this method.

Questions and answers

Q: What quite a drywall should I exploit on my basement walls?

A: Drywall comes in special moisture-resistant varieties, including “green board” or green drywall and purple drywall. Either is superior for basement applications to the quality white drywall. If the basement is at high risk of flooding or regular high humidity, you’ll also want to think about cementitious products like smooth panels, or maybe galvanized metal or other modernistic finish materials.

Q: What is the best way to insulate basement walls?

A: The 5 basic categories of insulation include foam board, spray poly foam (SPF) insulation, fiberglass, cellulose, rockwool. In some cases, a hybrid of systems also can be effective, like fiberglass and spray foam used together.

Q: Is it important to insulate your finished basement?

A: Yes. Insulating below grade increases comfort, and provides HVAC savings and moisture control. Homeowners can save $390 on electrical costs per annum with a finished basement. And while the return on investment does take time, insulation upgrades actually offer a quicker payback than window replacements.

Q: What exterior insulation should I exploit for my basement?

A: Ideally, exterior insulation should be installed before backfilling walls. However, if permanent features like walks, driveways or patios make excavating the basement wall too costly, then foam board should run down several feet along the foundation’s outside wall then continue horizontally out from the vertical walls for 3’ to 5’.

Conclusion

Basement insulation is unquestionably a crucial factor to think about while insulating other parts of the building and particularly if that building is your comfy house. you would possibly think that thermal insulation may be a costly approach or investment but if you’re during a construction phase then it’ll not cost you much compared to the opposite investments. It surely enhances the lifespan of the building and reduces the post-maintenance costs. Live comfortably and save your energy consumption to scale back your expenses. The key to our success is that we put the needs of the client first, give them solutions, and get the work done in a timely and very efficient manner.

There are many benefits to insulating a garage that may not come to mind right away. For example, energy conservation is a huge plus, as you’re able to maintain a more consistent temperature. In turn, you don’t have to overwork your A/C unit which can lower your energy bills. Further, insulation acts as a sound barrier. The extra buffer can keep noise from the street and the home contained. Are you someone who performs a lot of projects in their garage that require power tools? Insulation’s soundproofing feature will keep you in the good graces of your neighbors.

Overall, we can show you some of the reasons why you should trust Eco Spray Insulation for this kind of project:

1. We will make the garage usable. During the winter most garages sit cold and unused. Folks drive into the garage, close the overhead door, and make a beeline for the warm part of the house. Well, what if you could actually turn this part of your home into a usable space 12 months a year? Our expert will help you archive this.

2. Adjacent rooms will be warmer. If the garage is simply above or maybe even below freezing that has a huge effect on the temperature of all adjoining spaces. Typically the garage links to the living areas of the house through the kitchen. If the garage is freezing cold, heat is going to be leaking through one kitchen wall into the freezing cold space and each time the door to the garage is opened it’ll be like opening a door on to the surface. Likewise, a bedroom above an uninsulated garage is sort of a bedroom sitting on a cube.

3. A quieter home. Most homeowners aren’t aware just what proportion noise filters into their home through the garage. This is often very true if you reside in an urban setting. Much of this noise however is often effectively filtered out by insulating the garage. You’ll not only enjoy lower energy bills but a quieter home.

4. Lower energy bills. Speaking of lower energy bills… A poorly insulated garage won’t only create higher heating costs during the winter but higher A/C costs during the summer months. even as heat is often siphoned off through the walls into a freezing cold garage so to heat from a stifling hot, poorly insulated garage will radiate through the walls into the home’s living areas.

5. Enhanced home value. Adding insulation to the garage won’t only make your home less costly to heat and funky, it’ll also add substantial bottom-line market price to your home. If buyers have a choice between a home that costs X amount to heat and funky and a comparable one that costs 10% less to heat and funky which one does one think will attract the upper bids?Well, no worries! We at Eco Spray, with the professionalism that defines us, will make your home a valuable one.

6. A more comfortable garage experience. Yes, getting into or out of your car within the garage rather than outside protects you from the driving rain, snow, sleet, and wind. It also makes the experience of transiting from your car to the house or house to the car safer. But if that garage is poorly insulated you’re still stepping out of your house into a freezing cold environment then into a freezing cold car. A properly insulated garage will make the transition from house to car and car to deal with a less striking one no matter whether it’s -20° or 100° outside.

7. A happier, healthier car. By any reasonable measure, cars are pretty tough. But they’re also high-tech, precision machines that operate more effectively and efficiently in warm weather than they are doing within the cold. Storing your car during a freezing cold garage puts pressure on the battery, features a significant negative effect on tire pressure (and by extension tire function, safety and longevity), makes windshield wipers brittle and fewer effective and causes many of the fluids the car must operate at peak efficiency – including gasoline, power-assisted steering fluid, and transmission fluid – to thicken and lose effectiveness. The products that we use will save you money, time, and you will be safe at your house.

Advantages of Insulating Your Garage

• You can use your garage year-round
• Reduced transmission of heat and cold
• Pipes and shared ceilings don’t leave many choices
• Insulation protects your personal items
• Protect your family from carbon monoxide
• Noise transmission is reduced

How to Insulate a Garage with Spray Foam

For most homeowners, controlling their garage’s temperature may be a challenge. Keeping a continuing temperature during a room which features a door that opens several times each day , or is even left open for hours at a time, are often problematic.This is why you should call our experts and we will give you the most efficient solution and you will have benefits in long terms.Constant temperature fluctuations have the potential to wreck items like tools, cars, or toys stored within the garage. Further, a poorly insulated garage also can wreak havoc on energy bills.We have the best product of spray foam and a professional team which will assist you.

Spray foam insulation means installing a product that gives an air barrier, a vapour barrier and improved energy performance beat one. Homeowners looking to climate control their garage can see tremendous results with spray foam. To best affect exhaust in both attached and detached garages, closed cell spray foam is usually the higher option. Since spray foam insulation can form its own air barrier and vapour barrier, only the heat barrier is left to put in – which may be as simple as covering the spray foam with drywall.

How to Insulate a Garage with Fiberglass Insulation

Fiberglass insulation makes for an efficient, affordable, and versatile approach to garage insulation. it’s naturally non-combustible thanks to being made up of sand and recycled glass, and may be easily installed as batts. Fiberglass insulation also makes for excellent soundproofing, which helps keep garage noises inside the garage and break away your living spaces. Blown In Insulation is another choice for those who are looking for other options. 

To insulate a garage with fiberglass insulation, the primary thing you’ll want to think about is the area you’re insulating. For wall cavities, fiberglass batt insulation is both effective and affordable. However, for the harder to succeed in places, like rim joists, spray foam is probably going to be the higher option. In terms of garage insulation, both fiberglass batts and spray foam are often used alongside each other. In fact, they will both even be used within an equivalent wall cavity through the flash and batt approach that’s detailed below.

Benefits of insulating the garage ceiling:

These following six benefits just might convince you that it’s time to enhance the insulation, and perhaps even the warmth , in your garage.

• Garages are used for far more than simply keeping your vehicle protected against the weather. Today you’ll usually find fitness equipment, play areas, project workshops, and more inside these spaces. If there are proper insulation and warmth, it ensures you’ll enjoy the space for any activity, regardless of what the weather could be.
• In most homes with an attached garage, the entry door features insulation and weather-stripping. However, those measures don’t do any good if it’s extremely popular or cold. whenever you open the door, those conditions make their way inside your home, forcing your heating and A/C to figure even harder to take care of the temperature. If the garage is insulated, you’ll confirm you aren’t trying to combat the warmth or the cold. Our team will assure you of the long benefits that you will get from our job.
• If you’ve got a laundry room or pipes that run through the garage, insulation and warmth are a requirement. Frozen or busted pipes are time-consuming, irritating, and may be messy and dear to repair. Additionally, if there’s an area above the garage, it’ll be subjected to whatever temperature extremes are found within the area below. This suggests that it might be difficult to sleep or maintain comfortable temperatures without incurring additional energy costs to battle the warmth or cold leaching into space through the ground.
• Whether you employ the garage for storing seasonal decorations and items or for showing off collections, humidity causes rust, and temperature extremes may result in damage that greatly diminishes the worth of all of those items. If you want to use the garage just for parking the cars, we can insulate it with blown in insulation instead of spray foam. And you have two options: fiberglass insulation or cellulose. Cellulose is a better product because it is ecologic. Our team will explain to you the importance of the products and then you can choose.
• Many vehicles today have remote start systems, and that they are fairly easy to interact with, especially if there are little ones within the home. Without insulation within the walls, any carbon monoxide gas trapped within the garage can seep into your home and have a significant impact on you and your loved ones’ health.
• Do you sleep in a neighborhood where neighbors are close by? If so, your early morning within the workshop or your teen’s band practice can cause serious irritation to those that sleep in the immediate vicinity. Additionally, having an insulated garage also means you won’t need to hear all the racket happening around your home, like when children are out playing or adults are using lawnmowers and other equipment. Fiberglass insulation is an option for those who want privacy and no rumors.

Conclusions

We get it. There are tons of economic spray foam companies out there, all vying for your business. Deciding between all of them is often overwhelming. Our experts will make this thing easy for you. You’re getting our commitment that the products that we use, are going to be free from defect or fault. We at Eco Spray Insulation believe in taking the time to teach each and each customer the advantages of spray foam and other products. We’ll inform you each step of the way on what products are best and why they slot in your space. Good prices and therefore the better of the standard provided from our spray foam professionals.

With more knowledge of the products also as our recommendations, you’ll make better decisions on your insulation needs. Our products also will help to scale back your impact on the environment by reducing the necessity for heating and A/C. And another thing is that our products are Eco Friendly. Because we all know that you simply care about the environment.

So give us a call at (416) 860-6664 and you’ll get a free estimate for your house, or send us an email at info@ecosprayinsulation.ca, and that we are going to be very happy to assist you!

Why do basement walls in Mississauga need to be insulated?

We often find the basement not a very important part of our homes and we don’t bother to give it that extra care. Thinking of it as just a storage room we leave it as it is for years.

In most cases, the basement is located underground and that brings a natural coolness to it. Since no sun hits the walls the moisture can really affect and damage other parts of the house and the cost to fix that would be quite considerable.

Adding insulation in your basement walls in Mississauga will benefit your house as:

• Reducing heat loss indoors. When you heat your house in the wintertime, that heat when the insulation is applied won’t travel through.
• It will prevent freezing in the water pipes system.
• Protects other parts of the house from moisture.
• It will keep a constant temperature.
• Protects against insect infestation.

What are the pros of insulation your house walls?

When you start building a house or even when you consider reconstructing parts of it, always keep in mind why you should insulate the walls. And there are plenty of reasons why!

Noise barrier: As we all know living in an apartment complex or even in a private house with front and back yards, the noises that come from outside can sometimes be annoying. In this case insulating will help improve the acoustic inside your home.

Reducing energy consumption: When you heat or cool your house depending on the season we’re in, you consume energy, weather is electrical or any other kind. By insulating, the temperature inside every room will remain stable.

Money saver: By having a constant temperature indoors as a result of insulating the walls will benefit you with the energy bills and sometimes by insulating your basement that will transform it from a storage place to a more welcoming place and it will be an extra room in your house (again it benefits if you want to sell that house any day).

Controls moisture: As said before the basement is an underground room and the moisture that comes from the ground can travel through the basement walls, ceiling, and damage other walls inside the house. Insulating will improve this and prevent the damage.

What is the best way to insulate your basement?

Talking about insulating the basement there are two possibilities. One is exterior and one is interior. Us, at Eco Spray Insulation as a company, have come to the conclusion that the best and economical way to insulate the basements here in Mississauga is the interior way. What we do is spray a coat of spray foam inside the walls. This will insulate the house from moisture, noises, insect infestation, and will improve the temperature that you want to keep indoors. Our team will be careful enough to consider any cracks, moisture, or air leakage so the installation will go smoothly and the customer will be happy with the results.

Spray Foam insulation is the best choice

What is spray foam? Spray foam a product of two materials isocyanate and polyol resin when mixed together. This mix creates a reaction that looks like foam and it can expand up to 50 times its liquid volume after sprayed in place. This will close any crack that leads to air, moisture, and anything else entering the house. At Eco Spray Insulation, our priority is our customer. The team that we have is very professional and has every knowledge needed to complete decent work.  As the most requested way for basement insulation in Mississauga, we believe the spray foam way is the best option. As when you use it the benefits are a ton. You can save energy, money, and time. You won’t need to worry about moisture, air, or anything leaking from outside to inside. The spray foam insulation technology is the best investment you can make.

Everything starts from the bottom. Save your house by insulating your basement.

Enough with excessive thinking. Get in touch with Eco Spray Insulation for the best experience. Learn more about us and the benefits of home insulation. Our team will be more than happy to walk you through the process and make you comfortable enough to choose us. For more information contact us via email at info@ecosprayinsulation.ca or by phone at +1 (416) 860-6664.

Why Insulation?

The most obvious benefit of having a well insulated property is increased thermal efficiency, which is a measure of your home’s ability to maintain a desirable temperature internally. It is crucial that insulation is fitted in order to make any space more efficient at this job. Regardless of what time of the year it is, with good high quality insulation, you have the best chance of maintaining the kind of climate you want in your home.

Once you insulate your home, you will minimize the need to run your heaters and air conditioners as much as you previously did. This will help you keep more money in your pocket and less going towards your energy bills. If you decide to insulate your home during the stages of building it, you will also find that the construction phase benefits from a speedier build. This is because, as insulation covers the interior of a building under construction, internal work can proceed uninterrupted.

Another advantage of insulation is that it provides your building with some level of sound dampening. This means more quiet, inside as this extra layer of insulation material acts to further prevent external sounds from being heard inside your home and sound from your home being heard outside.

Understanding R-Values

Before choosing which type of insulation is best for your home, it is important first to understand R-Values. R-Value is a way of measuring your insulation’s ability to resist heat flow. The higher the R-Value of insulation the more effective is at insulation your property.

But remember, when selecting the appropriate R-Value for your home, it won’t always benefit you to select the highest, because of different build styles of home and different environments call for different levels of heat resistance. For example, one home may require insulation rated with an R-Value of 7, while another can have the same level of protection at an R-Value of 4. To find out what’s right for you, it’s best to have a professional insulation company to access your home.

What Type of Insulation Should I Choose?

Each type of insulation provides a unique set of benefits capable of being maximized in certain uses. Eco Spray Insulation can help you determine which type of insulation is the best fit for your needs. We have listed below a brief introduction of each type:

Spray Foam Insulation

Spray foam insulation can be used in nearly every part of a home including, wall cavities, joists, attic and basements. It is an effective product with an extremely high R-Value for every inch that is applied. Spray foam is available in both open and closed cell variations and it offers an air and vapor barrier in addition to its insulative qualities.

It is quick and easy to install and doesn’t require any additional upkeep or installation materials, like an air barrier. At Eco Spray, we work with spray foam insulation because it offers exceptional value in terms of both indoor and your return on investment.

Fiberglass Batt Insulation

An effective and affordable option for homeowners looking to make upgrades, fiberglass batt insulation is a common choice for wall insulation. It is made using recycled materials, fiberglass batt can greatly improve a home’s energy performance when professionally installed. They are flame retardant and can be installed in attics, wall cavities and other areas of the home.  

Batt style insulations do really well at retaining their R-Value over time, this is why they are so commonly used. They are very inexpensive and easy to install and don’t sink or settle after installation.

Blown-in Insulation or Loose Fill Insulation

Blown-in or loose fill insulation is rapidly becoming a favorite type of insulation because of its ease of installation. Blown-in is made up of small chunks of either cellulose or glass fibers. It is usually used in attics and to fill wall cavities. A small opening is all that is needed to fill a space, no walls need to come down.

Blown-in insulation is a great option for irregular spaces where a fast installation might be preferable. So if you are interested in environmentally friendly options, a cellulose based blown-in insulation might be a good option, since it is made of post-consumer paper waste.

Choosing the Right Type of Insulation

When selecting the perfect insulation for you, it comes down to a variety of factors, including climate, your home type, and budget. But if you are looking for the best long-term solution, foam insulation products will create the air seal in your home that will make it more comfortable, while saving money on your monthly energy bills. Foam insulation doesn’t settle and it fills all the crannies and nooks where it is installed.

Eco Spray Insulation team strives to provide the best quality products and the highest standard of expertise. Our experience and professionalism goal is that you never have to worry about anything less than thorough and complete workmanship. We can help you narrow down your options and offer our expert opinions on what will work best within your budget.  If you are still unsure of what you need, contact us today at +1 (416) 860-6664 or by email at info@ecosprayinsulation.ca.

Request a Free Quote for Spray Foam Insulation