Eco Spray Insulation has carefully prepared this article with the aim to highlight the advantages of blown in insulation as well as its average cost of blown in insulation. Learn how making this investment can boost your home’s comfort and save you money in the long run.

What does Blown In Insulation mean why is important for property owners?

By minimizing heat transmission, blown-in insulation, sometimes referred to as loose fill insulation, increases a building’s energy efficiency. As a result of the insulation materials being blasted or sprayed into position with the aid of specialized machinery, it is known as blown in insulation because it can reach and fill locations that are hard to access. The method of application is the primary distinction between blown in insulation and other types of insulation. Insulation that is blown in often consists of tiny fibers or particles that are poured or blown into the appropriate areas, such as crawlspaces, walls, or attics. This insulation technique makes it the perfect option for upgrading current buildings or insulating poorly shaped spaces, where it may be more difficult to install typical insulation materials properly.

Common materials used for Blown In Insulation

• Cellulose Insulation → To increase its safety, blown-in cellulose insulation is typically treated with fire-retardant chemicals. Cellulose insulation is created from recycled paper fibers. Due to their close proximity to one another, cellulose particles effectively block the flow of heat. Since it is environmentally friendly, cellulose insulation is frequently chosen by the majority of Canadian homeowners and has good soundproofing qualities.

Blown In Insulation Benefits

• Gap-Filling Ability → Blown in insulation is excellent at filling holes and gaps, creating a smooth barrier that lowers air loss. This reduces drafts and raises the building’s overall energy effectiveness.
• Effective in Irregular Spaces → Due to the way it is applied, blown in insulation is especially helpful for insulating rooms that have irregular shapes, corners, and obstructions. These spaces can be difficult to insulate using regular rolls or batts.
• Better Thermal Efficiency → Blown in insulation forms a thick layer of insulation that efficiently limits heat transfer. Ensuring that the inside temperature is acceptable, reduces the need for heating and cooling systems and lowers energy costs.
• Soundproofing → The blown-in insulation’s dense, fibrous structure also aids in decreasing sound transmission and noise pollution inside the building.
• Environmentally friendly options → One option that supports sustainability initiatives is cellulose blown in insulation, which is created from recycled materials and is greener than some other insulation materials.

For improving a building’s energy efficiency, blown in insulation is a flexible and effective option, particularly in retrofitting projects and locations where regular insulation technologies are impracticable. The constant thermal barrier it generates prevents energy loss and boosts occupant comfort.

What Factors influence the Average Cost of Blown In Insulation, and how can homeowners budget effectively?

The average cost of blown in insulation may differ based on a number of variables, including the type of insulation material used, the area that has to be insulated, the desired insulation thickness, labor expenses, and regional price differences. 

Blown In Cellulose Insulation

• Between $1.50 per square foot for top up insulation and  $1.60 per square foot for a complete blown in insulation project.
• Due to its recycled composition, blown in cellulose insulation provides superior thermal performance, soundproofing, and environmental friendliness.

Pricing Differences Among Regions for Cellulose Insulation

• Depending on the area and the state of the local economy, the average cost of blown in insulation may vary. Pricing might vary depending on a number of variables, including labor expenses, the average cost of blown in insulation, and the demand for insulation services.
• Due to its eco-friendliness and popularity among environmentally aware customers, cellulose insulation may be easier to find and more reasonably priced in locations where there is a significant emphasis on sustainability and green building techniques.
• Additionally, there may be a greater demand for insulation in areas with extreme weather (cold winters or extremely hot summers), which might affect prices.

It’s critical to balance the positive aspects of the average cost of blown in insulation with the initial expenditure. Although cellulose insulation may cost more than fiberglass, its greater insulating qualities and soundproofing qualities can result in long-term cost reductions and an improved living environment.

What is the ROI considering the Average Cost of Blown In Insulation and its potential for long-term cost savings?

Due to its ability to produce a more power-efficient building envelope, blown in insulation can result in long-term cost savings through lower energy bills. Blowing in insulation can reduce costs in the following ways:

• Higher Energy Efficiency → Insulation that is blown in creates a seamless, continuous thermal barrier to reduce heat transfer. It stops air leakage and lessens the amount of warm or cooled air leaving the outside by properly sealing gaps, cracks, and cavities in the building’s construction. By using less energy to maintain a pleasant indoor temperature, the air conditioning, ventilation, and HVAC systems can run more effectively.
• Lower Heating and Cooling Costs →The heating and cooling system doesn’t have to work as hard to keep a constant inside temperature because there is less heat loss in the winter and less heat gain in the summer. Homeowners or building tenants may consequently see a large decrease in their heating and cooling expenses, resulting in future cost savings.
• Reduced Energy Consumption → Due to blown in insulation’s outstanding thermal efficiency, the HVAC system can operate for shorter periods of time and use less energy. This decreased energy use not only results in cost savings but also minimizes the building’s carbon footprint and environmental impact.
• Lower Greenhouse Gas Emissions → Blower in insulation lowers the building’s total energy requirement by reducing the need for constant heating and cooling. In turn, greenhouse gas emissions, a significant cause of climate change and global warming, are decreased. 
• Conservation of Natural Resources → For the generation of power and for heating, conventional energy sources including coal, oil, and natural gas are frequently employed. Energy-efficient home insulation promotes resource conservation by consuming less energy, resulting in a more sustainable future. 
• Reduced Air Pollution → The use and production of energy derived from fossil fuels cause the emission of a variety of pollutants into the atmosphere, which increases air pollution. Energy-efficient house insulation reduces this effect by consuming less energy overall, which improves air quality and hygiene.
• Less Demand on Energy Infrastructure →The demand for energy falls as more buildings get green insulation. This decrease in energy consumption may result in less stress on energy infrastructure, which could minimize the need for more power plants and energy facilities.

Blown in insulation, in general, not only lowers energy costs directly for homeowners and building occupants, but it also has major environmental advantages by encouraging energy efficiency and minimizing the entire negative effect of buildings on the environment. It is vital to creating a sustainable and environmentally friendly future for everyone.

Why Insulation Contractors are important to be hired for Blown In Insulation Services?

The best outcomes come from picking the proper insulation contractor for your home’s insulation installation. Find helpful advice on how to choose an insulation expert who is dependable and qualified, understand the average cost of blown in insulation as well as a handy checklist to help you make the best decision for your family and home.

Tips for Choosing a Reliable and Qualified Insulation Contractor

• Search for Advice → Ask your friends, relatives, or neighbors for recommendations of reliable insulation contractors who have had success.

• Verify Credentials → Check the contractor’s credentials to install insulation, including their licensing, insurance, and certification.

• Experience Counts → Choose insulation-related contractors with a lot of experience to ensure knowledge and competence.

• Review Client Comments → To evaluate the reputation and level of client satisfaction of the contractor, read internet reviews and testimonies.

Eco Spray Insulation is the insulation contractor to choose for your home’s insulation needs if you want superior knowledge and environmentally friendly insulation options. With our practical advice and thorough checklist, you can easily select a trustworthy insulation company to guarantee a successful blown in insulation installation. With the help of our devoted team at Eco Spray Insulation, you may improve your home’s comfort and energy efficiency today!

By doing these, we are not only saving money on energy bills but the environment as well. The daily increasing use of energy has a high impact on climate change and we can all do our part by following these tips. In this article, we will take a look at some tips on energy saving, to somewhat help Ontarian homeowners create a better understanding of energy efficiency and hopefully make them take action today. 

Home Insulation

Home insulation is the gold standard of energy efficiency. As aforementioned, you can expect to save up to 45% on energy bills when insulation is added to your building. There are several insulation methods and each creates an effective air barrier that prevents heat flow. When insulation is added to your building walls, attic, basement, it can seal all gaps and cracks, making this way a more comfortable living, working, or storage space that also necessitates less energy for heating and cooling. 

And insulation also serves as a sound barrier, insect and rodent repellent, fire retardant, and it can increase your property value by a whopping 3 up to 6%. What to know more about insulation? Well, keep in mind that different insulation methods deliver different R-Values. In short, R-Value is the standard that measures the performance of insulation material. The higher it is, the lower your energy bills will be. 

With that said, spray foam can lower your electricity bills by up to 45% which is quite impressive when compared with fiberglass insulation (25%) and cellulose insulation (25 up to 30%). What you will also need to know is how to hire an insulation contractor. See, the installation process is key to enjoying the benefits of insulation for decades to come and if it is not completed successfully, you will more likely lose money rather than save. Before hiring a Toronto moving company and relocating, make sure to check if the new house has the insulation installed or not.

Energy Efficient Gadgets

Although energy-efficient gadgets are more expensive in the beginning and for some might also be cost-depriving, you can expect the initial investment to pay off with the passing of years by saving on energy. Understandably, energy-efficient gadgets use less energy for the same tasks without compromising the quality. Since heating and cooling “is to blame” for 60% of your electricity usage, a smart/programmable thermostat is where you can start.

 You can further increase your energy preservation efforts by switching to LED light bulbs and using low-flow showerheads (more about them below). Other energy-efficient gadgets we recommend using are modern boilers (can avoid heat loss that escapes up the flue) and solar panels. You can significantly save on energy with the latter, but the installation and maintenance cost can be too much for the average homeowner. And to further guarantee the functionality of your home insulation, you can choose to install new and energy-efficient doors and windows. 

Easy Practices to Save on Energy at Home

Use energy-efficient light bulbs

Switching your conventional light bulbs to LEDs can lower your monthly energy bills significantly and that can be an advantage in the long run. The old traditional incandescent light bulbs need anywhere from 25-80% more electricity than light-emitting diode bulbs (LEDs), Halogen incandescent bulbs, and compact fluorescent lights (CFLs). Although energy-saving light bulbs are more expensive, their longer lifespan and energy conservation will pay off. 

Use natural light more

Use natural sunlight as much as you can. One south-facing window, for example, can illuminate anywhere from 20 up to 100 times its area. And during this time of the day, turning off one 60-watt bulb for 4 hours can save you up to $8 over a year. 

Take shorter showers

Hot water is expensive. If a family of two would cut their shower time by 1 minute, they could save up to $40 a year on electricity. Switching to low-flow showerheads can also lower water consumption and eventually decrease water bills significantly. 

Maintain your AC unit

For your air conditioner to run smoothly and efficiently, it needs to be maintained continuously. What you can do is swap out the old air filters with new ones every at least 90 days. You can also decrease its energy consumption significantly by removing anything that might be blocking the vents. 

Turn off not in use electronics, appliances

Turn your appliances off standby mode and you can save up to $50 a year. Rest assured as many electronic devices (TVs, printers, computers, fax machines) can be plugged off without compromising their functionality. 

Fix any leaky plumbing fitting

Leaky faucets can waste up to 11.000 liters of water each year. Fixing them can save you up to $40 a year. 

Turn off the AC on your way out

That’s a no-brainer! Turning off your air conditioner when not needed can save on energy bills. In addition, a programmable thermostat can further help you lower energy use for heating and cooling.

Draft-proof your house

Last but not least, take a survey on your house perimeter and check for any drafts. You can apply weatherstrips for your doors and windows, re-caulk where necessary, and install new door sweeps. 

Why Choose Eco Spray?

Eco Spray Insulation team is proud to be operating in the Greater Toronto Area and the suburban communities since 2008. Throughout the years, we have established ourselves as experts in energy-efficient building practices like insulation systems are. Whether be a small maintenance issue or a basement to attic project, our team of professionals serves every customer with the highest standard of workmanship. Contact us to receive a free estimate.

Reduce air leakage with spray foam insulation

Spray foam insulation provides the best air sealing and thermal insulation. It keeps a home warm in the winter and cool in the summer. It will save electricity, increase indoor comfort, and improve air circulation. Spray foam also regulates air moisture movement, lowering the risk of moisture-related problems.

Spray foam insulation, when designed properly, provides an airtight atmosphere that removes the need for a separate vapour barrier. This, in and of itself, prevents air moisture from moving and moisture pockets from forming. The better-controlled moisture levels allow for a more comfortable (and healthier) indoor living atmosphere in both winter and summer.

Spray foam is used to increase energy efficiency. With a successful installation, the HVAC system can run more efficiently throughout the year, using less energy. Annual savings on heating and cooling will help “pay down” the cost of spray foam insulation in many homes. This is why you should choose our experts to do the insulation.

When the whole house is built, this can be quite necessary. Spray foam is a specialty of seasoned residential installers at Great Northern Insulation. Every product is assembled according to code, and every application adheres to the manufacturer’s guidelines.

How Does Insulation Conserve Energy?

Insulating Walls, Floors and Attics

The barrier that prevents the inside and outside air temperatures from equalizing is your home’s outer shell, or envelope. The less energy your heating and cooling systems have to use to warm or cool the air in your house, the better insulated the walls, floors, and roof are.

Sealing Air Leaks

Even if the walls are well insulated, warm or cold air will escape through cracks and gaps around windows and doors. Caulk and weather-strip air leaks to save energy. Drafty homes use more energy to heat and cool than tightly sealed homes, so caulk and weather-strip air leaks to save energy. It’s almost impossible to over-seal an older home; in most cases, this is due to the construction methods used, and there will still be enough fresh air to retain good ventilation after sealing the largest leaks.

Insulating Ducts

Leaky ducts can reduce performance by up to 20% in homes with central heating and air conditioning systems that push air through a duct system. Seal and insulate all of your ducts to ensure that warm and cold air gets to where it needs to go as quickly as possible.When ducts pass through unfinished areas such as attics or basements, good insulation is even more necessary. Finally, to prevent air from escaping behind the wall or under the floor, seal the areas around the registers.

Reflective Insulation

While most insulation blocks heat transfer, reflective insulation, also known as a radiant barrier, is mounted on the attic floor and reflects heat radiated into the attic by a hot roof, preventing it from entering the living space below. Although reflective insulation will help you save money on your heating bills, its primary function is to keep your home cool in hot weather climates.

How to Stop Cold Floors

Check Your Insulation

Cold floors may be caused by a poorly insulated home. The quality of insulation in your home can be checked by a home inspector or an energy auditor to see if it is adequate. You should check your attic insulation to see if it is adequately shielding your home from the cold. You can easily add insulation to your attic by yourself. However, since it necessitates opening up the walls or flooring, applying insulation to the walls or under the floors may be more difficult.

Use Carpeting

Some floor materials have a cooler natural temperature than others. Hardwood, tile, and linoleum floors are warmer than carpeted floors due to the extra insulation provided by the carpeting. To insulate your floors and keep them warm, use carpeting or area rugs. Thin rugs or carpets may not be as effective at keeping cold floors at bay as thicker ones. More protection against the cold is provided by thicker carpets.

Check Your Doors and Windows

If a room is drafty, cold air from the outside will reach and chill the floors. This happens when access points to the outside of the building, such as doors and windows, are not properly sealed. To avoid drafts, replace the weather stripping on your doors and windows on a regular basis. This also aids in the energy efficiency of your house.

Check the Room Below the Floor

Rooms above basements, garages, or crawl spaces also have cold floors. This is due to the fact that the rooms below are not climate-controlled like the rest of the house. It’s cold in your garage if it’s cold outside. That means the space above the garage is more likely to have a cold floor. You can install insulation between the ceiling of the room below and the floor of the room above to avoid cold floors in this case, or you can use carpeting in the room above to help insulate the floor from the cold air below it.

Tips for sealing air leaks to save money

• Where plumbing, ducting, or electrical wiring passes through walls, floors, ceilings, and soffits above cabinets, caulk and seals air leaks.
• Foam gaskets should be installed behind outlets and switch plates on walls.
• Inspect the insulation for air leakage and mold in filthy spots. Seal leaks with low-expansion spray foam made for the job, and if necessary, add house flashing.
• Check the ceiling paint and carpet for dirty spots that might suggest air gaps at interior wall/ceiling joints and wall/floor joists, and caulk them.
• Replace single-pane windows with more energy-efficient double-pane low-emissivity windows or cover single-pane windows with storm windows. 
• Cover larger holes around walls, baseboards, and other places where air can escape with foam sealant.
• When not in use, cover your kitchen exhaust fan to prevent air leaks.
• Check to make sure your dryer vent isn’t clogged. This will save resources and possibly avoid fire from occurring.
• Replace door bottoms and thresholds with foldable sealing joints.
• Keep the flue muddy fireplace tightly closed when not in use.
• Seal air leaks around fireplace chimneys, furnaces, and gas-fired water heater vents with fire-resistant materials such as sheet metal or sheet metal and cement furnace caulk.

Why choose Eco Spray Insulation?

Here at Eco Spray Insulation, we know that our customers are interested in making changes to reduce their environmental footprint. We have the privilege of helping them along this path with the installation of eco-friendly commercial spray foam and residential spray foam. Not only are these high-performance products, but they will also help to reduce your environmental impact by reducing the need for heating and air conditioning. Our spray foam products are the best and all Ontarians can see a drop in their utility costs.

Our unsurpassed attention to detail means that once you hire us, you don’t have to worry about anything. We handle all kinds of spray foam insulation projects from start to finish. What are you waiting for? Give us a call at 416 860 6664 or email us at info@ecosprayinsulation.ca today to upgrade to new commercial spray foam or residential spray foam.